[PATCH v2 07/11] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes

[Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>]

From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

To silence the warnings shown by the driver at boot time, we add a
fixed regulator for the 5V supply of usbotg2 and specify the polarity
of the overcurrent signal for usbotg1.

Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 2299cad900af..d3eb21aa9014 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -45,6 +45,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg1_vbus";
@@ -191,6 +198,7 @@
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
@@ -198,6 +206,7 @@
 &usbotg2 {
 	dr_mode = "host";
 	disable-over-current;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };
 
-- 
2.17.1