On Sat, 12 Oct 2019 15:27:08 +0200 Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx> wrote: > > > > On Mon, 7 Oct 2019 11:43:36 +0200 > > Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote: > > > > > Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on > > > the same register map used by LSM9DS1 > > I'm feeling paranoid. Is this definitely different form the > > LSM6DSO which is already supported? > > > > If so ST loose for stupid part naming. > > Yes, it is very different..AFAIK LSM6DSO is last IMU sensor from ST > while LSM6DS0 is very old (it has the same register map used in > LSM9DS1 imu). No way anything could possibly go wrong ;) *dramatic sigh* > > Regards, > Lorenzo > > > > > Jonathan > > > > > > > > Lorenzo Bianconi (2): > > > iio: imu: st_lsm6dsx: add support to LSM6DS0 > > > dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings > > > > > > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > > > drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > > > 6 files changed, 18 insertions(+), 2 deletions(-) > > > > > >
