On Mon, 7 Oct 2019 11:43:36 +0200 Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote: > Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on > the same register map used by LSM9DS1 I'm feeling paranoid. Is this definitely different form the LSM6DSO which is already supported? If so ST loose for stupid part naming. Jonathan > > Lorenzo Bianconi (2): > iio: imu: st_lsm6dsx: add support to LSM6DS0 > dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings > > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > 6 files changed, 18 insertions(+), 2 deletions(-) >
