Re: [PATCH 0/2] add support to STM LSM6DS0 6-axis Mems sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>
> On Mon,  7 Oct 2019 11:43:36 +0200
> Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote:
>
> > Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on
> > the same register map used by LSM9DS1
> I'm feeling paranoid. Is this definitely different form the
> LSM6DSO which is already supported?
>
> If so ST loose for stupid part naming.

Yes, it is very different..AFAIK LSM6DSO is last IMU sensor from ST
while LSM6DS0 is very old (it has the same register map used in
LSM9DS1 imu).

Regards,
Lorenzo

>
> Jonathan
>
> >
> > Lorenzo Bianconi (2):
> >   iio: imu: st_lsm6dsx: add support to LSM6DS0
> >   dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
> >
> >  Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
> >  drivers/iio/imu/st_lsm6dsx/Kconfig                       | 2 +-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h                  | 2 ++
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c             | 5 ++++-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c              | 5 +++++
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c              | 5 +++++
> >  6 files changed, 18 insertions(+), 2 deletions(-)
> >
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux