On Mon, Sep 16, 2019 at 12:43:53PM +0200, Gilles DOFFE wrote:
> The pca9535 gpio expander is present on the Rex baseboard, but missing
> from the dtsi.
> The pca9535 is on i2c2 bus which is common to the three SOM
> variants (Basic/Pro/Ultra), thus it is activated by default.
>
> Add also the new gpio controller and the associated interrupt line
> MX6QDL_PAD_NANDF_CS3__GPIO6_IO16.
>
> Signed-off-by: Gilles DOFFE <gilles.doffe@xxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/imx6qdl-rex.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> index 97f1659144ea..8a748ca1b108 100644
> --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
> @@ -132,6 +132,19 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> + pca9535: gpio8@27 {
gpio-expander might be a better node name?
Shawn
> + compatible = "nxp,pca9535";
> + reg = <0x27>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca9535>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> eeprom@57 {
> compatible = "atmel,24c02";
> reg = <0x57>;
> @@ -237,6 +250,12 @@
> >;
> };
>
> + pinctrl_pca9535: pca9535 {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x17059
> + >;
> + };
> +
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> --
> 2.20.1
>
