On Wed, Sep 11, 2019 at 05:34:03PM +0800, Bibby Hsieh wrote:
> From: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
>
> This patch adds DT binding document for Media Data Path 3 (MDP3)
> a unit in multimedia system used for scaling and color format convert.
>
> Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@xxxxxxxxxxxx>
> Signed-off-by: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
> ---
> .../bindings/media/mediatek,mt8183-mdp3.txt | 201 ++++++++++++++++++
> 1 file changed, 201 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> new file mode 100644
> index 000000000000..0d15326d12c1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
> @@ -0,0 +1,201 @@
> +* Mediatek Media Data Path 3
> +
> +Media Data Path 3 (MDP3) is used for scaling and color space conversion.
> +
> +Required properties (controller node):
> +- compatible: "mediatek,mt8183-mdp"
> +- mediatek,scp: the node of system control processor (SCP), using the
> + remoteproc & rpmsg framework, see
> + Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
> +- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
> +- mediatek,mailbox-gce: the node of global command engine (GCE), used to
> + read/write registers with critical time limitation, see
> + Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
> +- mboxes: mailbox number used to communicate with GCE.
> +- gce-subsys: sub-system id corresponding to the register address.
> +- gce-event-names: in use event name list, used to correspond to event IDs.
> +- gce-events: in use event IDs list, all IDs are defined in
> + 'dt-bindings/gce/mt8183-gce.h'.
> +
> +Required properties (all function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma" - read DMA
> + "mediatek,mt8183-mdp-rsz" - resizer
> + "mediatek,mt8183-mdp-wdma" - write DMA
> + "mediatek,mt8183-mdp-wrot" - write DMA with rotation
> + "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
> +- reg: Physical base address and length of the function block register space
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- power-domains: a phandle to the power domain, see
> + Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (DMA function blocks, child node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-rdma"
> + "mediatek,mt8183-mdp-wdma"
> + "mediatek,mt8183-mdp-wrot"
> +- iommus: should point to the respective IOMMU block with master port as
> + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> + for details.
> +- mediatek,larb: must contain the local arbiters in the current Socs, see
> + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> + for details.
> +
> +Required properties (input path selection node):
> +- compatible:
> + "mediatek,mt8183-mdp-dl" - MDP direct link input source selection
> +- reg: Physical base address and length of the function block register space
> +- clocks: device clocks, see
> + Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (ISP PASS2 (DIP) module path selection node):
> +- compatible:
> + "mediatek,mt8183-mdp-imgi" - input DMA of ISP PASS2 (DIP) module for raw image input
> +- reg: Physical base address and length of the function block register space
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
> +
> +Required properties (SW node):
> +- compatible: Should be one of
> + "mediatek,mt8183-mdp-exto" - output DMA of ISP PASS2 (DIP) module for yuv image output
> + "mediatek,mt8183-mdp-path" - MDP output path selection
> +- mediatek,mdp-id: HW index to distinguish same functionality modules.
These probably need to be split up to separate files in preparation to
convert to schema (not required, feel free to convert to schema now).
> +
> +Example:
> + mdp_camin@14000000 {
Don't use '_' in node or property names.
> + compatible = "mediatek,mt8183-mdp-dl";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14000000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
> + <&mmsys CLK_MM_MDP_DL_RX>;
> + };
> +
> + mdp_camin2@14000000 {
> + compatible = "mediatek,mt8183-mdp-dl";
> + mediatek,mdp-id = <1>;
> + reg = <0 0x14000000 0 0x1000>;
Overlapping addresses for these 2 nodes. Don't do that.
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> + clocks = <&mmsys CLK_MM_IPU_DL_TXCK>,
> + <&mmsys CLK_MM_IPU_DL_RX>;
> + };
> +
> + mdp_rdma0: mdp_rdma0@14001000 {
> + compatible = "mediatek,mt8183-mdp-rdma",
> + "mediatek,mt8183-mdp3";
> + mediatek,scp = <&scp>;
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14001000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + clocks = <&mmsys CLK_MM_MDP_RDMA0>,
> + <&mmsys CLK_MM_MDP_RSZ1>;
> + iommus = <&iommu M4U_PORT_MDP_RDMA0>;
> + mediatek,larb = <&larb0>;
> + mediatek,mmsys = <&mmsys>;
> + mediatek,mm-mutex = <&mutex>;
> + mediatek,mailbox-gce = <&gce>;
> + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
> + <&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
> + gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
> + <&gce 0x14010000 SUBSYS_1401XXXX>,
> + <&gce 0x14020000 SUBSYS_1402XXXX>,
> + <&gce 0x15020000 SUBSYS_1502XXXX>;
> + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
> + <CMDQ_EVENT_MDP_RDMA0_EOF>,
> + <CMDQ_EVENT_MDP_RSZ0_SOF>,
> + <CMDQ_EVENT_MDP_RSZ1_SOF>,
> + <CMDQ_EVENT_MDP_TDSHP_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_SOF>,
> + <CMDQ_EVENT_MDP_WROT0_EOF>,
> + <CMDQ_EVENT_MDP_WDMA0_SOF>,
> + <CMDQ_EVENT_MDP_WDMA0_EOF>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
> + <CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
> + <CMDQ_EVENT_WPE_A_DONE>,
> + <CMDQ_EVENT_SPE_B_DONE>;
> + };
> +
> + mdp_imgi@15020000 {
> + compatible = "mediatek,mt8183-mdp-imgi";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x15020000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1502XXXX 0 0x1000>;
> + };
> +
> + mdp_img2o@15020000 {
You need a reg property if you have a unit-address.
> + compatible = "mediatek,mt8183-mdp-exto";
> + mediatek,mdp-id = <1>;
> + };
> +
> + mdp_rsz0: mdp_rsz0@14003000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14003000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ0>;
> + };
> +
> + mdp_rsz1: mdp_rsz1@14004000 {
> + compatible = "mediatek,mt8183-mdp-rsz";
> + mediatek,mdp-id = <1>;
> + reg = <0 0x14004000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_RSZ1>;
> + };
> +
> + mdp_wrot0: mdp_wrot0@14005000 {
> + compatible = "mediatek,mt8183-mdp-wrot";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14005000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WROT0>;
> + iommus = <&iommu M4U_PORT_MDP_WROT0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_path0_sout@14005000 {
> + compatible = "mediatek,mt8183-mdp-path";
> + mediatek,mdp-id = <0>;
reg?
> + };
> +
> + mdp_wdma: mdp_wdma@14006000 {
> + compatible = "mediatek,mt8183-mdp-wdma";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x14006000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_WDMA0>;
> + iommus = <&iommu M4U_PORT_MDP_WDMA0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + mdp_path1_sout@14006000 {
> + compatible = "mediatek,mt8183-mdp-path";
> + mediatek,mdp-id = <1>;
reg?
> + };
> +
> + mdp_ccorr: mdp_ccorr@1401c000 {
> + compatible = "mediatek,mt8183-mdp-ccorr";
> + mediatek,mdp-id = <0>;
> + reg = <0 0x1401c000 0 0x1000>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
> + clocks = <&mmsys CLK_MM_MDP_CCORR>;
> + };
> --
> 2.18.0
>
