[RFC, v3, 1/4] dt-binding: mt8183: Add Mediatek MDP3 dt-bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>

This patch adds DT binding document for Media Data Path 3 (MDP3)
a unit in multimedia system used for scaling and color format convert.

Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@xxxxxxxxxxxx>
Signed-off-by: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
---
 .../bindings/media/mediatek,mt8183-mdp3.txt   | 201 ++++++++++++++++++
 1 file changed, 201 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
new file mode 100644
index 000000000000..0d15326d12c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
@@ -0,0 +1,201 @@
+* Mediatek Media Data Path 3
+
+Media Data Path 3 (MDP3) is used for scaling and color space conversion.
+
+Required properties (controller node):
+- compatible: "mediatek,mt8183-mdp"
+- mediatek,scp: the node of system control processor (SCP), using the
+  remoteproc & rpmsg framework, see
+  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
+- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
+- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
+- mediatek,mailbox-gce: the node of global command engine (GCE), used to
+  read/write registers with critical time limitation, see
+  Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
+- mboxes: mailbox number used to communicate with GCE.
+- gce-subsys: sub-system id corresponding to the register address.
+- gce-event-names: in use event name list, used to correspond to event IDs.
+- gce-events: in use event IDs list, all IDs are defined in
+  'dt-bindings/gce/mt8183-gce.h'.
+
+Required properties (all function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8183-mdp-rdma"  - read DMA
+        "mediatek,mt8183-mdp-rsz"   - resizer
+        "mediatek,mt8183-mdp-wdma"  - write DMA
+        "mediatek,mt8183-mdp-wrot"  - write DMA with rotation
+        "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
+- reg: Physical base address and length of the function block register space
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Required properties (DMA function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8183-mdp-rdma"
+        "mediatek,mt8183-mdp-wdma"
+        "mediatek,mt8183-mdp-wrot"
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+
+Required properties (input path selection node):
+- compatible:
+        "mediatek,mt8183-mdp-dl"    - MDP direct link input source selection
+- reg: Physical base address and length of the function block register space
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Required properties (ISP PASS2 (DIP) module path selection node):
+- compatible:
+        "mediatek,mt8183-mdp-imgi"  - input DMA of ISP PASS2 (DIP) module for raw image input
+- reg: Physical base address and length of the function block register space
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Required properties (SW node):
+- compatible: Should be one of
+        "mediatek,mt8183-mdp-exto"  - output DMA of ISP PASS2 (DIP) module for yuv image output
+        "mediatek,mt8183-mdp-path"  - MDP output path selection
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Example:
+		mdp_camin@14000000 {
+			compatible = "mediatek,mt8183-mdp-dl";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14000000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
+				<&mmsys CLK_MM_MDP_DL_RX>;
+		};
+
+		mdp_camin2@14000000 {
+			compatible = "mediatek,mt8183-mdp-dl";
+			mediatek,mdp-id = <1>;
+			reg = <0 0x14000000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+			clocks = <&mmsys CLK_MM_IPU_DL_TXCK>,
+				<&mmsys CLK_MM_IPU_DL_RX>;
+		};
+
+		mdp_rdma0: mdp_rdma0@14001000 {
+			compatible = "mediatek,mt8183-mdp-rdma",
+				     "mediatek,mt8183-mdp3";
+			mediatek,scp = <&scp>;
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				<&mmsys CLK_MM_MDP_RSZ1>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mediatek,larb = <&larb0>;
+			mediatek,mmsys = <&mmsys>;
+			mediatek,mm-mutex = <&mutex>;
+			mediatek,mailbox-gce = <&gce>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				<&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
+				<&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
+				<&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
+			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				<&gce 0x14010000 SUBSYS_1401XXXX>,
+				<&gce 0x14020000 SUBSYS_1402XXXX>,
+				<&gce 0x15020000 SUBSYS_1502XXXX>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+				<CMDQ_EVENT_MDP_RDMA0_EOF>,
+				<CMDQ_EVENT_MDP_RSZ0_SOF>,
+				<CMDQ_EVENT_MDP_RSZ1_SOF>,
+				<CMDQ_EVENT_MDP_TDSHP_SOF>,
+				<CMDQ_EVENT_MDP_WROT0_SOF>,
+				<CMDQ_EVENT_MDP_WROT0_EOF>,
+				<CMDQ_EVENT_MDP_WDMA0_SOF>,
+				<CMDQ_EVENT_MDP_WDMA0_EOF>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
+				<CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
+				<CMDQ_EVENT_WPE_A_DONE>,
+				<CMDQ_EVENT_SPE_B_DONE>;
+		};
+
+		mdp_imgi@15020000 {
+			compatible = "mediatek,mt8183-mdp-imgi";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x15020000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1502XXXX 0 0x1000>;
+		};
+
+		mdp_img2o@15020000 {
+			compatible = "mediatek,mt8183-mdp-exto";
+			mediatek,mdp-id = <1>;
+		};
+
+		mdp_rsz0: mdp_rsz0@14003000 {
+			compatible = "mediatek,mt8183-mdp-rsz";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		};
+
+		mdp_rsz1: mdp_rsz1@14004000 {
+			compatible = "mediatek,mt8183-mdp-rsz";
+			mediatek,mdp-id = <1>;
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		};
+
+		mdp_wrot0: mdp_wrot0@14005000 {
+			compatible = "mediatek,mt8183-mdp-wrot";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14005000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		mdp_path0_sout@14005000 {
+			compatible = "mediatek,mt8183-mdp-path";
+			mediatek,mdp-id = <0>;
+		};
+
+		mdp_wdma: mdp_wdma@14006000 {
+			compatible = "mediatek,mt8183-mdp-wdma";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		mdp_path1_sout@14006000 {
+			compatible = "mediatek,mt8183-mdp-path";
+			mediatek,mdp-id = <1>;
+		};
+
+		mdp_ccorr: mdp_ccorr@1401c000 {
+			compatible = "mediatek,mt8183-mdp-ccorr";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x1401c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_CCORR>;
+		};
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux