Document the bindings used by Cadence NAND controller driver
Signed-off-by: Piotr Sroka <piotrs@xxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes for v6:
- add documentation for address-cells and size-cells
- remove not needed space
- put myself as maintainer of the Cadence nand driver bindings
Changes for v5:
- replace "_" by "-" in all properties
- change compatible name from cdns,hpnfc to cdns,hp-nfc
Changes for v4:
- add commit message
Changes for v3:
- add unit suffix for board_delay
- move child description to proper place
- remove prefix cadence_ for reg and sdma fields
Changes for v2:
- remove chip dependends parameters from dts bindings
- add names for register ranges in dts bindings
- add generic bindings to describe NAND chip representation
---
.../bindings/mtd/cadence-nand-controller.txt | 53 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
new file mode 100644
index 000000000000..f3893c4d3c6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
@@ -0,0 +1,53 @@
+* Cadence NAND controller
+
+Required properties:
+ - compatible : "cdns,hp-nfc"
+ - reg : Contains two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and
+ length of the controller register set. The second entry is the
+ address and length of the Slave DMA data port.
+ - reg-names: should contain "reg" and "sdma"
+ - #address-cells: should be 1. The cell encodes the chip select connection.
+ - #size-cells : should be 0.
+ - interrupts : The interrupt number.
+ - clocks: phandle of the controller core clock (nf_clk).
+
+Optional properties:
+ - dmas: shall reference DMA channel associated to the NAND controller
+ - cdns,board-delay-ps : Estimated Board delay. The value includes the total
+ round trip delay for the signals and is used for deciding on values
+ associated with data read capture. The example formula for SDR mode is
+ the following:
+ board delay = RE#PAD delay + PCB trace to device + PCB trace from device
+ + DQ PAD delay
+
+Child nodes represent the available NAND chips.
+
+Required properties of NAND chips:
+ - reg: shall contain the native Chip Select ids from 0 to max supported by
+ the cadence nand flash controller
+
+See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+generic bindings.
+
+Example:
+
+nand_controller: nand-controller@60000000 {
+ compatible = "cdns,hp-nfc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
+ reg-names = "reg", "sdma";
+ clocks = <&nf_clk>;
+ cdns,board-delay-ps = <4830>;
+ interrupts = <2 0>;
+ nand@0 {
+ reg = <0>;
+ label = "nand-1";
+ };
+ nand@1 {
+ reg = <1>;
+ label = "nand-2";
+ };
+
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 16e16445b88b..94d78f4e29ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3584,6 +3584,7 @@ M: Piotr Sroka <piotrs@xxxxxxxxxxx>
L: linux-mtd@xxxxxxxxxxxxxxxxxxx
S: Maintained
F: drivers/mtd/nand/raw/cadence-nand-controller.c
+F: Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
CADET FM/AM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xxxxxxxxx>
--
2.15.0
