On Thu, 1 Aug 2019 11:55:10 +0800
Mason Yang <masonccyang@xxxxxxxxxxx> wrote:
> Document the bindings used by the Macronix raw NAND controller.
>
> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mtd/mxic-nand.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> new file mode 100644
> index 0000000..de37d60
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> @@ -0,0 +1,19 @@
> +Macronix Raw NAND Controller Device Tree Bindings
> +-------------------------------------------------
> +
> +Required properties:
> +- compatible: should be "mxicy,multi-itfc-v009-nand-morph"
> +- reg: should contain 1 entry for the registers
> +- interrupts: interrupt line connected to this raw NAND controller
> +- clock-names: should contain "ps", "send" and "send_dly"
> +- clocks: should contain 3 phandles for the "ps", "send" and
> + "send_dly" clocks
> +
> +Example:
> +
> + nand: nand-controller@43c30000 {
> + compatible = "mxicy,multi-itfc-v009-nand-morph";
> + reg = <0x43c30000 0x10000>;
> + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
> + clock-names = "send", "send_dly", "ps";
You should have subnodes describing the NAND connected to the
controller (see [1]).
[1]https://elixir.bootlin.com/linux/v5.3-rc2/source/Documentation/devicetree/bindings/mtd/nand-controller.yaml#L131
> + };
