Re: [PATCH v6 2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

> On Thu,  1 Aug 2019 11:55:10 +0800
> Mason Yang <masonccyang@xxxxxxxxxxx> wrote:
> 
> > Document the bindings used by the Macronix raw NAND controller.
> > 
> > Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/mtd/mxic-nand.txt | 19 
+++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >  create mode 100644 
Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/
> Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > new file mode 100644
> > index 0000000..de37d60
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
> > @@ -0,0 +1,19 @@
> > +Macronix Raw NAND Controller Device Tree Bindings
> > +-------------------------------------------------
> > +
> > +Required properties:
> > +- compatible: should be "mxicy,multi-itfc-v009-nand-morph"
> > +- reg: should contain 1 entry for the registers
> > +- interrupts: interrupt line connected to this raw NAND controller
> > +- clock-names: should contain "ps", "send" and "send_dly"
> > +- clocks: should contain 3 phandles for the "ps", "send" and
> > +    "send_dly" clocks
> > +
> > +Example:
> > +
> > +   nand: nand-controller@43c30000 {
> > +      compatible = "mxicy,multi-itfc-v009-nand-morph";
> > +      reg = <0x43c30000 0x10000>;
> > +      clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
> > +      clock-names = "send", "send_dly", "ps";
> 
> You should have subnodes describing the NAND connected to the
> controller (see [1]).
> 
> [1]
https://elixir.bootlin.com/linux/v5.3-rc2/source/Documentation/devicetree/
> bindings/mtd/nand-controller.yaml#L131
> 
> > +   };
> 

Do you mean to add patternProperties ?

                 nand: nand-controller@43c30000 {
                                 compatible = 
"mxicy,multi-itfc-v009-nand-morph";
                                 reg = <0x43c30000 0x10000>;
                                 clocks = <&clkwizard 0>, <&clkwizard 1>, 
<&clkc 15>;
                                 clock-names = "send", "send_dly", "ps";

+                               nand@0 {
+
+                               };
                 };

something like that.

thanks & best regards,
Mason


CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux