An optional devicetree property was added to the imx-weim driver, which if present instructs it to operate in burst clock mode. Update the dt-bindings to reflect this. Signed-off-by: Sven Van Asbroeck <TheSven73@xxxxxxxxx> --- Documentation/devicetree/bindings/bus/imx-weim.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index dda7d6d66479..1b1d1c5c21ea 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -44,6 +44,10 @@ Optional properties: what bootloader sets up in IOMUXC_GPR1[11:0] will be used. + - fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of + devices, the presence of this property indicates that + the weim bus should operate in Burst Clock Mode. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the -- 2.17.1
