From: Anson Huang <Anson.Huang@xxxxxxx> The system counter block guide states that the base clock is internally divided by 3 before use, that means the clock input of system counter defined in DT should be base clock which is normally from OSC, and then internally divided by 3 before use. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> --- Changes since V4: - to solve the clock driver probed after system counter driver issue, now we can easily switch to use fixed clock defined in DT and get its rate, then divided by 3 to get real clock rate for system counter driver, no need to add "clock-frequency" property in DT. --- drivers/clocksource/timer-imx-sysctr.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c index fd7d680..b7c80a3 100644 --- a/drivers/clocksource/timer-imx-sysctr.c +++ b/drivers/clocksource/timer-imx-sysctr.c @@ -20,6 +20,8 @@ #define SYS_CTR_EN 0x1 #define SYS_CTR_IRQ_MASK 0x2 +#define SYS_CTR_CLK_DIV 0x3 + static void __iomem *sys_ctr_base; static u32 cmpcr; @@ -134,6 +136,9 @@ static int __init sysctr_timer_init(struct device_node *np) if (ret) return ret; + /* system counter clock is divided by 3 internally */ + to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV; + sys_ctr_base = timer_of_base(&to_sysctr); cmpcr = readl(sys_ctr_base + CMPCR); cmpcr &= ~SYS_CTR_EN; -- 2.7.4
