[PATCH V5 3/5] arm64: dts: imx8mm: Add system counter node

[Anson.Huang@xxxxxxx]

From: Anson Huang <Anson.Huang@xxxxxxx>

Add i.MX8MM system counter node to enable timer-imx-sysctr
broadcast timer driver.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V4:
	- update the clock info using fixed clock node;
	- correct the reg range;
	- update the interrupt number as the system counter driver ONLY uses 1 irq now.
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index b5637f8..8cf7f34 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -560,6 +560,14 @@
 				#pwm-cells = <2>;
 				status = "disabled";
 			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
 		};
 
 		aips3: bus@30800000 {
-- 
2.7.4