This patchset add support for H3 and H6 thermal sensor. BTY, do a cleanup in thermal makfile. Yangtao Li (11): thermal: sun8i: add thermal driver for h6 dt-bindings: thermal: add binding document for h6 thermal controller thermal: fix indentation in makefile thermal: sun8i: get ths sensor number from device compatible thermal: sun8i: rework for sun8i_ths_get_temp() thermal: sun8i: get ths init func from device compatible thermal: sun8i: rework for ths irq handler func thermal: sun8i: support ahb clocks thermal: sun8i: rework for ths calibrate func dt-bindings: thermal: add binding document for h3 thermal controller thermal: sun8i: add thermal driver for h3 .../bindings/thermal/sun8i-thermal.yaml | 94 +++ MAINTAINERS | 7 + drivers/thermal/Kconfig | 14 + drivers/thermal/Makefile | 9 +- drivers/thermal/sun8i_thermal.c | 534 ++++++++++++++++++ 5 files changed, 654 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml create mode 100644 drivers/thermal/sun8i_thermal.c --- v4: -add h3 support -fix yaml file --- 2.17.1
