[PATCH v4 11/11] thermal: sun8i: add thermal driver for h3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds the support for allwinner h3 thermal sensor.

Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx>
---
 drivers/thermal/sun8i_thermal.c | 72 +++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 260b24340f5b..c8ee291f3b17 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -27,6 +27,14 @@
 #define TEMP_TO_REG				672
 #define CALIBRATE_DEFAULT			0x800
 
+#define SUN8I_THS_CTRL0				0x00
+#define SUN8I_THS_CTRL2				0x40
+#define SUN8I_THS_IC				0x44
+#define SUN8I_THS_IS				0x48
+#define SUN8I_THS_MFC				0x70
+#define SUN8I_THS_TEMP_CALIB			0x74
+#define SUN8I_THS_TEMP_DATA			0x80
+
 #define SUN50I_THS_CTRL0			0x00
 #define SUN50I_H6_THS_ENABLE			0x04
 #define SUN50I_H6_THS_PC			0x08
@@ -36,6 +44,9 @@
 #define SUN50I_H6_THS_TEMP_CALIB		0xa0
 #define SUN50I_H6_THS_TEMP_DATA			0xc0
 
+#define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
+
 #define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
 #define SUN50I_THS_FILTER_EN			BIT(2)
 #define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
@@ -121,6 +132,21 @@ static const struct regmap_config config = {
 	.fast_io = true,
 };
 
+static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+	int state, ret = 0;
+
+	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+	if (state & BIT(8)) {
+		regmap_write(tmdev->regmap, SUN8I_THS_IS,
+			     BIT(8));
+		ret |= BIT(1);
+	}
+
+	return ret;
+}
+
 static int sun50i_h6_irq_ack(struct ths_device *tmdev)
 {
 	int i, state, ret = 0;
@@ -154,6 +180,14 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+			       u16 *caldata, int callen)
+{
+	regmap_write(tmdev->regmap, SUN8I_THS_TEMP_CALIB, *caldata);
+
+	return 0;
+}
+
 static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 				   u16 *caldata, int callen)
 {
@@ -325,6 +359,32 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
 	return ret;
 }
 
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * period = (x + 1) * 4096 / clkin; ~10ms
+	 * enable data interrupt
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_IC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(58) | BIT(8));
+	/*
+	 * clkin = 24MHz
+	 * T acquire = clkin / (x + 1)
+	 *           = 20us
+	 * enable sensor
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+		     SUN8I_THS_CTRL0_T_ACQ0(479));
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+		     SUN8I_THS_CTRL2_T_ACQ1(479) | BIT(0));
+
+	return 0;
+}
+
 static int sun50i_thermal_init(struct ths_device *tmdev)
 {
 	int val;
@@ -431,6 +491,17 @@ static int sun8i_ths_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct ths_thermal_chip sun8i_h3_ths = {
+	.sensor_num = 1,
+	.offset = -1794,
+	.scale = -121,
+	.has_ahb_clk = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+};
+
 static const struct ths_thermal_chip sun50i_h6_ths = {
 	.sensor_num = 2,
 	.offset = -2794,
@@ -443,6 +514,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
 };
 
 static const struct of_device_id of_ths_match[] = {
+	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
 	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
 	{ /* sentinel */ },
 };
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux