Hi!
> - LEDs
> - gyro
> - magnetometer
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led1 {
> + label = "LED 1";
So, what kind of LED do you have, and what color is it? label should probably be something like
notify:green.
> + charger@6b { /* bq25896 */
> + compatible = "ti,bq25890";
> + reg = <0x6b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_charger>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + ti,battery-regulation-voltage = <4192000>; /* 4.192V */
> + ti,charge-current = <1600000>; /* 1.6 A */
No space before A, for consistency.
> + ti,termination-current = <66000>; /* 66mA */
> + ti,precharge-current = <1300000>; /* 1.3A */
I thought precharge is usually something low, because you are not yet sure of battery health...?
> + ti,minimum-sys-voltage = <2750000>; /* 2.75V */
Are you sure? Normally systems shut down at 3.2V, 3V or so. Li-ion batteries don't
really like to be discharged _this_ deep.
Pavel
