Hi Pavel,
On 2019-05-23 12:19, Pavel Machek wrote:
Hi!
- LEDs
- gyro
- magnetometer
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "LED 1";
So, what kind of LED do you have, and what color is it? label should
probably be something like
notify:green.
As we don't have a specific use for these yet does it really matter if
there is a colour or a number associated with them ?
+ charger@6b { /* bq25896 */
+ compatible = "ti,bq25890";
+ reg = <0x6b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ ti,battery-regulation-voltage = <4192000>; /* 4.192V */
+ ti,charge-current = <1600000>; /* 1.6 A */
No space before A, for consistency.
+ ti,termination-current = <66000>; /* 66mA */
+ ti,precharge-current = <1300000>; /* 1.3A */
I thought precharge is usually something low, because you are not yet
sure of battery health...?
I think I put that in incorrectly. The intention was 130mA.
+ ti,minimum-sys-voltage = <2750000>; /* 2.75V */
Are you sure? Normally systems shut down at 3.2V, 3V or so. Li-ion
batteries don't
really like to be discharged _this_ deep.
You are correct. I'll fix it for the next version.
Thanks
Angus
Pavel
