The following patches add driver for SD Host controller on Socionext's Milbeaut M10V platforms. SD Host controller on Milbeaut is consist of two controller parts. One is core controller F_SDH30, this is similar to sdhci-fujitsu controller. Another is bridge controller. This bridge controller is not compatible with sdhci-fujitsu controller. This is special for Milbeaut series. It has the several parts, - reset control - clock enable / select for SDR50/25/12 - hold control of DATA/CMD line - select characteristics for WP/CD/LED line - Re-tuning control for mode3 - Capability setting Timeout Clock / Base Clock / Timer Count for Re-Tuning / Debounce period These requires special procedures at reset or clock enable/change or further tuning of clock. Takao Orito (2): dt-bindings: mmc: add DT bindings for Milbeaut SD controller mmc: sdhci-milbeaut: add Milbeaut SD controller driver .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 35 ++ drivers/mmc/host/Kconfig | 11 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-milbeaut.c | 393 +++++++++++++++++++++ drivers/mmc/host/sdhci_f_sdh30.c | 26 +- drivers/mmc/host/sdhci_f_sdh30.h | 32 ++ 6 files changed, 473 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt create mode 100644 drivers/mmc/host/sdhci-milbeaut.c create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h -- 1.9.1
