On 2019-04-16 00:58, Marco Felsch wrote:
Hi Agnus,
On 19-04-15 16:53, Angus Ainslie (Purism) wrote:
The Librem5 devkit is based on the imx8mq from NXP. This is a default
devicetree to boot the board to a command prompt.
You should also provide a patch which adds the devicetree to the yaml
file, see: Documentation/devicetree/bindings/arm/fsl.yaml.
Sure, what is that yaml file for ?
Angus
Thanks,
Marco
Changes since v3:
Freshly sorted and pressed nodes.
Change the backlight to an interpolated scale.
Dropped i2c2.
Dropped devkit version number to match debian MR.
Changes since v2:
Fixed incorrect phy-supply for the fsl-fec.
Dropped unused regulator property.
Fixup Makefile for linux-next.
Changes since v1:
Dropped config file.
Updated the board compatible label.
Changed node names to follow naming conventions.
Added a more complete regulator hierachy.
Removed unused nodes.
Removed unknown devices.
Fixed comment style.
Dropped undocumented properties.
Angus Ainslie (Purism) (2):
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
dt-bindings: Add an entry for Purism SPC
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx8mq-librem5-devkit.dts | 822
++++++++++++++++++
3 files changed, 824 insertions(+)
create mode 100644
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
--
2.17.1
