Hi Agnus, On 19-04-15 16:53, Angus Ainslie (Purism) wrote: > The Librem5 devkit is based on the imx8mq from NXP. This is a default > devicetree to boot the board to a command prompt. You should also provide a patch which adds the devicetree to the yaml file, see: Documentation/devicetree/bindings/arm/fsl.yaml. Thanks, Marco > > Changes since v3: > > Freshly sorted and pressed nodes. > Change the backlight to an interpolated scale. > Dropped i2c2. > Dropped devkit version number to match debian MR. > > Changes since v2: > > Fixed incorrect phy-supply for the fsl-fec. > Dropped unused regulator property. > Fixup Makefile for linux-next. > > Changes since v1: > > Dropped config file. > Updated the board compatible label. > Changed node names to follow naming conventions. > Added a more complete regulator hierachy. > Removed unused nodes. > Removed unknown devices. > Fixed comment style. > Dropped undocumented properties. > > Angus Ainslie (Purism) (2): > arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit > dt-bindings: Add an entry for Purism SPC > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mq-librem5-devkit.dts | 822 ++++++++++++++++++ > 3 files changed, 824 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts > > -- > 2.17.1 > > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
