From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> This series adds cpufreq-dt operating points for da850 boards supported with device tree (da850-lcdk, da850-lego-ev3, da850-evm). Last patch enables CPUFREQ_DT in davinci_all_defconfig. v1 -> v2: - use the VDCDC3_1.2V regulator as cpu-supply on da850-evm v2 -> v3: - drop patch 1, as the revision tag is in fact correctly passed to the kernel by u-boot - only enable the 375 operating point for da850-evm as this is the standard frequency for this board v3 -> v4: - split the first patch into three separate changesets: one adding the operating points to the main dtsi and two enabling cpufreq on da850-lego-ev3 and da850-lcdk - remove the operating point not mentioned in the datasheet (415 MHz) - fix commit message in patch 4/5 Bartosz Golaszewski (1): ARM: dts: da850-evm: enable cpufreq David Lechner (4): ARM: dts: da850: add cpu node and operating points to DT ARM: dts: da850-lego-ev3: enable cpufreq ARM: dts: da850-lcdk: enable cpufreq ARM: davinci_all_defconfig: Enable CPUFREQ_DT arch/arm/boot/dts/da850-evm.dts | 13 +++++++ arch/arm/boot/dts/da850-lcdk.dts | 31 ++++++++++++++++ arch/arm/boot/dts/da850-lego-ev3.dts | 30 ++++++++++++++++ arch/arm/boot/dts/da850.dtsi | 50 ++++++++++++++++++++++++++ arch/arm/configs/davinci_all_defconfig | 1 + 5 files changed, 125 insertions(+) -- 2.21.0
