The Librem5 devkit is based on the imx8mq from NXP. This is a default devicetree to boot the board to a command prompt. Changes since v1: Dropped config file. Updated the board compatible label. Changed node names to follow naming conventions. Added a more complete regulator hierachy. Removed unused nodes. Removed unknown devices. Fixed comment style. Dropped undocumented properties. Angus Ainslie (Purism) (2): arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit dt-bindings: Add an entry for Purism SPC .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mq-librem5-devkit.dts | 850 ++++++++++++++++++ 3 files changed, 852 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts -- 2.17.1
