On Tue, Mar 12, 2019 at 02:35:17PM +0530, Vignesh Raghavendra wrote:
> Add dt bindings for TI syscon gate clock.
>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---
> .../bindings/clock/ti,syscon-gate-clock.txt | 35 +++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/ti,syscon-gate-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/ti,syscon-gate-clock.txt b/Documentation/devicetree/bindings/clock/ti,syscon-gate-clock.txt
> new file mode 100644
> index 000000000000..f2bc4281ddba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti,syscon-gate-clock.txt
> @@ -0,0 +1,35 @@
> +TI syscon gate clock
> +
> +The gate clock node must be provided inside a system controller node.
> +
> +Required:
> +- comaptible: Must be "ti,syscon-gate-clock"
> +- reg: Offset of register that controls the clock within syscon regmap
> +- ti,clock-bit-idx: bit index that control gate/ungating of clock
> +- clocks: phandle to the clock parent
> +- #clock-cells: must be <0>
> +
> +Example:
> + ctrlmmr_epwm_ctrl: syscon@104140{
> + compatible = "syscon", "simple-bus";
Can't be both of these...
> + reg = <0x0 0x104140 0x0 0x18>;
> + ranges = <0x0 0x0 0x104140>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ehrpwm0_tbclk: clk@0 {
> + compatible = "ti,syscon-gate-clock";
> + reg = <0x0>;
> + #clock-cells = <0>;
> + clocks = <&k3_clks 40 0>;
> + ti,clock-bit-idx = <0>;
This would imply you have multiple nodes at one address which is
discouraged.
> + };
We generally don't describe clocks as 1 clock per node. Give the parent
a specific compatible and make it a clock provider.
> +
> + ehrpwm1_tbclk: clk@4 {
> + compatible = "ti,syscon-gate-clock";
> + reg = <0x4>;
> + #clock-cells = <0>;
> + clocks = <&k3_clks 41 0>;
> + ti,clock-bit-idx = <0>;
> + };
> + };
> --
> 2.21.0
>
