On Fri, Feb 22, 2019 at 12:46 PM Alexis Ballier <aballier@xxxxxxxxxx> wrote: > > This adds basic support for the Orange Pi RK3399 board. > What works: > - SD card / emmc. > - Debug UART > - Ethernet > - USB: Type C, internal USB3 for SATA, 4 USB 2.0 ports > - Sensors: All of them but the Hall sensor. > - Buttons > - Wifi, Bluetooth > - HDMI out > > Signed-off-by: Alexis Ballier <aballier@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Heiko Stuebner <heiko@xxxxxxxxx> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > > --- > > The board is heavily based on the Sapphire one, hence this patch is also > based on this DT. This is why I kept the copyrights of the sapphire DT. > --- > .../devicetree/bindings/arm/rockchip.yaml | 5 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3399-orangepi.dts | 778 ++++++++++++++++++ > 3 files changed, 784 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
