On Wed, Feb 06, 2019 at 09:46:28AM +0000, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>
>
> On 06.02.2019 10:13, Ludovic Desroches wrote:
> > On Thu, Jan 31, 2019 at 05:18:04PM +0100, Claudiu Beznea - M18063 wrote:
> >> From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> >>
> >> SAM9X60 uses high and low drive strengths. To implement this, in
> >> at91_pinctrl_mux_ops::set_drivestrength and
> >> at91_pinctrl_mux_ops::get_drivestrength we need bit numbers of
> >> drive strengths (1 for low, 2 for high), thus change the code to
> >> allow the usage of drive strength bit numbers.
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> >> ---
> >> drivers/pinctrl/pinctrl-at91.c | 32 ++++++++++++++++++++------------
> >> 1 file changed, 20 insertions(+), 12 deletions(-)
> >>
> >> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> >> index 3d49bbbcdbc7..31f06dafca2e 100644
> >> --- a/drivers/pinctrl/pinctrl-at91.c
> >> +++ b/drivers/pinctrl/pinctrl-at91.c
> >> @@ -72,10 +72,15 @@ static int gpio_banks;
> >> * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
> >> * strength when there is no dt config for it.
> >> */
> >> -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT)
> >> -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT)
> >> -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT)
> >> -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT)
> >> +enum drive_strength_bit {
> >> + DRIVE_STRENGTH_BIT_DEF,
> >> + DRIVE_STRENGTH_BIT_LOW,
> >> + DRIVE_STRENGTH_BIT_MED,
> >> + DRIVE_STRENGTH_BIT_HI,
> >> +};
> >> +
> >> +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \
> >> + DRIVE_STRENGTH_SHIFT)
> >>
> >> /**
> >> * struct at91_pmx_func - describes AT91 pinmux functions
> >> @@ -551,7 +556,7 @@ static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem *pio,
> >> /* SAMA5 strength is 1:1 with our defines,
> >> * except 0 is equivalent to low per datasheet */
> >> if (!tmp)
> >> - tmp = DRIVE_STRENGTH_LOW;
> >> + tmp = DRIVE_STRENGTH_BIT_MSK(LOW);
> >>
> >> return tmp;
> >> }
> >> @@ -564,7 +569,7 @@ static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem *pio,
> >>
> >> /* strength is inverse in SAM9x5s hardware with the pinctrl defines
> >> * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */
> >> - tmp = DRIVE_STRENGTH_HI - tmp;
> >> + tmp = DRIVE_STRENGTH_BIT_MSK(HI) - tmp;
> >>
> >> return tmp;
> >> }
> >> @@ -600,7 +605,7 @@ static void at91_mux_sam9x5_set_drivestrength(void __iomem *pio, unsigned pin,
> >>
> >> /* strength is inverse on SAM9x5s with our defines
> >> * 0 = hi, 1 = med, 2 = low, 3 = rsvd */
> >> - setting = DRIVE_STRENGTH_HI - setting;
> >> + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting;
> >>
> >> set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin,
> >> setting);
> >> @@ -959,11 +964,11 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
> >> } \
> >> } while (0)
> >>
> >> -#define DBG_SHOW_FLAG_MASKED(mask,flag) do { \
> >> +#define DBG_SHOW_FLAG_MASKED(mask,flag,name) do { \
> >
> > checkpatch error: space required
>
> I'm aware of that but I added it in the way it was previously (were the
> checkpatch error was still present). Please let me know if you want me to
> send a new version fixing this.
I think it's the opportunity to fix it. If you can resend a new version
including my ack.
Regards
Ludovic
>
> Thank you,
> Claudiu Beznea
>
> >
> >> if ((config & mask) == flag) { \
> >> if (num_conf) \
> >> seq_puts(s, "|"); \
> >> - seq_puts(s, #flag); \
> >> + seq_puts(s, #name); \
> >> num_conf++; \
> >> } \
> >> } while (0)
> >> @@ -981,9 +986,12 @@ static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> >> DBG_SHOW_FLAG(PULL_DOWN);
> >> DBG_SHOW_FLAG(DIS_SCHMIT);
> >> DBG_SHOW_FLAG(DEGLITCH);
> >> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_LOW);
> >> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_MED);
> >> - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_HI);
> >> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(LOW),
> >> + DRIVE_STRENGTH_LOW);
> >> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(MED),
> >> + DRIVE_STRENGTH_MED);
> >> + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI),
> >> + DRIVE_STRENGTH_HI);
> >> DBG_SHOW_FLAG(DEBOUNCE);
> >> if (config & DEBOUNCE) {
> >> val = config >> DEBOUNCE_VAL_SHIFT;
> >> --
> >> 2.7.4
> >>
> >
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
