Dt-bindings doc about Loongson-1 interrupt controller
Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
---
.../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
new file mode 100644
index 000000000000..a4e17c3f5f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
@@ -0,0 +1,24 @@
+Loongson ls1x Interrupt Controller
+
+Required properties:
+
+- compatible : should be "loongson,ls1x-intc". Valid strings are:
+
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupts : Specifies the CPU interrupts the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@1fd01040 {
+ compatible = "loongson,ls1x-intc";
+ reg = <0x1fd01040 0x78>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>;
+};
\ No newline at end of file
--
2.20.1
