On Thu, Jan 24, 2019 at 11:27:30AM +0800, Jiaxun Yang wrote:
> Dt-bindings doc about Loongson-1 interrupt controller
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> ---
> .../loongson,ls1x-intc.txt | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> new file mode 100644
> index 000000000000..a4e17c3f5f93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> @@ -0,0 +1,24 @@
> +Loongson ls1x Interrupt Controller
> +
> +Required properties:
> +
> +- compatible : should be "loongson,ls1x-intc". Valid strings are:
> +
> +- reg : Specifies base physical address and size of the registers.
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.
> +- interrupts : Specifies the CPU interrupts the controller is connected to.
> +
> +Example:
> +
> +intc: interrupt-controller@1fd01040 {
> + compatible = "loongson,ls1x-intc";
> + reg = <0x1fd01040 0x78>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&cpu_intc>;
> + interrupts = <2>, <3>, <4>, <5>, <6>;
> +};
> \ No newline at end of file
Please fix.
Otherwise,
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
