Hi,
Just a ping.
The kbuilder reports some warning which I will fix in a v2 but I still
waiting for feedback from you.
Regards,
Marco
On 18-12-18 15:12, Marco Felsch wrote:
> Hi,
>
> this patch set adds the support for the Toshiba TC358746 Parallel
> MIPI-CSI2 bridge device.
>
> The last patch ("media: tc358746: update MAINTAINERS file") is optional,
> due to Hans answer to Michael [1]. We can drop this patch if it isn't
> needed.
>
> I added the v4l2-compliance test in relation to [1], I used v4l2-compliance
> version 1.16.0. Unfortunately the VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT test
> failed, but the device don't support events at all, as described in the
> commit message of the 2nd patch.
>
> The patche set was succefully rebased on top of media_tree/master and
> compile tested.
>
> [1] https://marc.info/?l=linux-kernel&m=154330540418714&w=2
>
> Regards,
> Marco
>
> 8<----------------------------------------------------------
>
> root@samx6i:~# v4l2-compliance -s -u /dev/v4l-subdev12
> v4l2-compliance SHA: not available, 32 bits
>
> Compliance test for device /dev/v4l-subdev12:
>
> Media Driver Info:
> Driver name : imx-media
> Model : imx-media
> Serial :
> Bus info :
> Media version : 4.20.0
> Hardware revision: 0x00000000 (0)
> Driver version : 4.20.0
> Interface Info:
> ID : 0x030000a6
> Type : V4L Sub-Device
> Entity Info:
> ID : 0x00000056 (86)
> Name : tc358746 6-000e
> Function : Video Interface Bridge
> Pad 0x01000057 : 0: Sink
> Link 0x0200008c: from remote pad 0x100005a of entity 'mt9m111 6-0048': Data, Enabled
> Pad 0x01000058 : 1: Source
> Link 0x0200008a: to remote pad 0x1000051 of entity 'imx6-mipi-csi2': Data, Enabled
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
>
> Allow for multiple opens:
> test second /dev/v4l-subdev12 open: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Sub-Device ioctls (Sink Pad 0):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Sub-Device ioctls (Source Pad 1):
> test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Try VIDIOC_SUBDEV_G/S_FMT: OK
> test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> test Active VIDIOC_SUBDEV_G/S_FMT: OK
> test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> fail: ../../../v4l-utils-1.16.0/utils/v4l2-compliance/v4l2-test-controls.cpp(816): subscribe event for control 'Image Processing Controls' failed
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 3 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK (Not Supported)
> test VIDIOC_TRY_FMT: OK (Not Supported)
> test VIDIOC_S_FMT: OK (Not Supported)
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> test VIDIOC_EXPBUF: OK (Not Supported)
>
> Total: 54, Succeeded: 53, Failed: 1, Warnings: 0
>
> 8<----------------------------------------------------------
>
> Marco Felsch (3):
> media: dt-bindings: add bindings for Toshiba TC358746
> media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
> media: tc358746: update MAINTAINERS file
>
> .../bindings/media/i2c/toshiba,tc358746.txt | 80 +
> MAINTAINERS | 7 +
> drivers/media/i2c/Kconfig | 12 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/tc358746.c | 1847 +++++++++++++++++
> drivers/media/i2c/tc358746_regs.h | 208 ++
> 6 files changed, 2155 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.txt
> create mode 100644 drivers/media/i2c/tc358746.c
> create mode 100644 drivers/media/i2c/tc358746_regs.h
>
> --
> 2.19.1
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
