Hi,
gentle ping..
On 19-01-23 13:54, Marco Felsch wrote:
> Hi,
>
> Just a ping.
>
> The kbuilder reports some warning which I will fix in a v2 but I still
> waiting for feedback from you.
>
> Regards,
> Marco
>
> On 18-12-18 15:12, Marco Felsch wrote:
> > Hi,
> >
> > this patch set adds the support for the Toshiba TC358746 Parallel
> > MIPI-CSI2 bridge device.
> >
> > The last patch ("media: tc358746: update MAINTAINERS file") is optional,
> > due to Hans answer to Michael [1]. We can drop this patch if it isn't
> > needed.
> >
> > I added the v4l2-compliance test in relation to [1], I used v4l2-compliance
> > version 1.16.0. Unfortunately the VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT test
> > failed, but the device don't support events at all, as described in the
> > commit message of the 2nd patch.
> >
> > The patche set was succefully rebased on top of media_tree/master and
> > compile tested.
> >
> > [1] https://marc.info/?l=linux-kernel&m=154330540418714&w=2
> >
> > Regards,
> > Marco
> >
> > 8<----------------------------------------------------------
> >
> > root@samx6i:~# v4l2-compliance -s -u /dev/v4l-subdev12
> > v4l2-compliance SHA: not available, 32 bits
> >
> > Compliance test for device /dev/v4l-subdev12:
> >
> > Media Driver Info:
> > Driver name : imx-media
> > Model : imx-media
> > Serial :
> > Bus info :
> > Media version : 4.20.0
> > Hardware revision: 0x00000000 (0)
> > Driver version : 4.20.0
> > Interface Info:
> > ID : 0x030000a6
> > Type : V4L Sub-Device
> > Entity Info:
> > ID : 0x00000056 (86)
> > Name : tc358746 6-000e
> > Function : Video Interface Bridge
> > Pad 0x01000057 : 0: Sink
> > Link 0x0200008c: from remote pad 0x100005a of entity 'mt9m111 6-0048': Data, Enabled
> > Pad 0x01000058 : 1: Source
> > Link 0x0200008a: to remote pad 0x1000051 of entity 'imx6-mipi-csi2': Data, Enabled
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> >
> > Allow for multiple opens:
> > test second /dev/v4l-subdev12 open: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_LOG_STATUS: OK
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 0 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Sub-Device ioctls (Sink Pad 0):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Sub-Device ioctls (Source Pad 1):
> > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Try VIDIOC_SUBDEV_G/S_FMT: OK
> > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK
> > test Active VIDIOC_SUBDEV_G/S_FMT: OK
> > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
> > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
> >
> > Control ioctls:
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > fail: ../../../v4l-utils-1.16.0/utils/v4l2-compliance/v4l2-test-controls.cpp(816): subscribe event for control 'Image Processing Controls' failed
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 3 Private Controls: 0
> >
> > Format ioctls:
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK (Not Supported)
> > test VIDIOC_TRY_FMT: OK (Not Supported)
> > test VIDIOC_S_FMT: OK (Not Supported)
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls:
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls:
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> > test VIDIOC_EXPBUF: OK (Not Supported)
> >
> > Total: 54, Succeeded: 53, Failed: 1, Warnings: 0
> >
> > 8<----------------------------------------------------------
> >
> > Marco Felsch (3):
> > media: dt-bindings: add bindings for Toshiba TC358746
> > media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
> > media: tc358746: update MAINTAINERS file
> >
> > .../bindings/media/i2c/toshiba,tc358746.txt | 80 +
> > MAINTAINERS | 7 +
> > drivers/media/i2c/Kconfig | 12 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/tc358746.c | 1847 +++++++++++++++++
> > drivers/media/i2c/tc358746_regs.h | 208 ++
> > 6 files changed, 2155 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.txt
> > create mode 100644 drivers/media/i2c/tc358746.c
> > create mode 100644 drivers/media/i2c/tc358746_regs.h
> >
> > --
> > 2.19.1
> >
> >
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
