Reference the PHY nodes from the USB controller nodes. The USB3 host controller is wired to: * the first PHY of the COMPHY IP * the OTG-capable UTMI PHY The USB2 host controller is wired to: * the host-only UTMI PHY Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index d87db3d4cc3d..f32dd1d048e4 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -347,6 +347,8 @@ marvell,usb-misc-reg = <&usb32_syscon>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; }; @@ -367,6 +369,8 @@ reg = <0x5e000 0x1000>; marvell,usb-misc-reg = <&usb2_syscon>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; }; -- 2.19.1
