Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 2, 2019 at 10:13 AM Long Cheng <long.cheng@xxxxxxxxxxxx> wrote:
>
> In DMA engine framework, add 8250 uart dma to support MediaTek uart.
> If MediaTek uart enabled(SERIAL_8250_MT6577), and want to improve
> the performance, can enable the function.
>
> Signed-off-by: Long Cheng <long.cheng@xxxxxxxxxxxx>
> ---
>  drivers/dma/mediatek/8250_mtk_dma.c |  652 +++++++++++++++++++++++++++++++++++
>  drivers/dma/mediatek/Kconfig        |   11 +
>  drivers/dma/mediatek/Makefile       |    1 +
>  3 files changed, 664 insertions(+)
>  create mode 100644 drivers/dma/mediatek/8250_mtk_dma.c
>
> diff --git a/drivers/dma/mediatek/8250_mtk_dma.c b/drivers/dma/mediatek/8250_mtk_dma.c
> new file mode 100644
> index 0000000..dbf811e
> --- /dev/null
> +++ b/drivers/dma/mediatek/8250_mtk_dma.c
> @@ -0,0 +1,652 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek 8250 DMA driver.
> + *
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Long Cheng <long.cheng@xxxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#include "../virt-dma.h"
> +
> +#define MTK_UART_APDMA_CHANNELS                (CONFIG_SERIAL_8250_NR_UARTS * 2)
> +
> +#define VFF_EN_B               BIT(0)
> +#define VFF_STOP_B             BIT(0)
> +#define VFF_FLUSH_B            BIT(0)
> +#define VFF_4G_SUPPORT_B       BIT(0)
> +#define VFF_RX_INT_EN0_B       BIT(0)  /*rx valid size >=  vff thre*/
> +#define VFF_RX_INT_EN1_B       BIT(1)
> +#define VFF_TX_INT_EN_B                BIT(0)  /*tx left size >= vff thre*/
> +#define VFF_WARM_RST_B         BIT(0)
> +#define VFF_RX_INT_FLAG_CLR_B  (BIT(0) | BIT(1))
> +#define VFF_TX_INT_FLAG_CLR_B  0
> +#define VFF_STOP_CLR_B         0
> +#define VFF_INT_EN_CLR_B       0
> +#define VFF_4G_SUPPORT_CLR_B   0
> +
> +/* interrupt trigger level for tx */
> +#define VFF_TX_THRE(n)         ((n) * 7 / 8)
> +/* interrupt trigger level for rx */
> +#define VFF_RX_THRE(n)         ((n) * 3 / 4)
> +
> +#define VFF_RING_SIZE  0xffffU

Well, the size is actually 0x10000. Maybe call this VFF_RING_SIZE_MASK?

> +/* invert this bit when wrap ring head again*/
> +#define VFF_RING_WRAP  0x10000U
> +
> +#define VFF_INT_FLAG           0x00
> +#define VFF_INT_EN             0x04
> +#define VFF_EN                 0x08
> +#define VFF_RST                        0x0c
> +#define VFF_STOP               0x10
> +#define VFF_FLUSH              0x14
> +#define VFF_ADDR               0x1c
> +#define VFF_LEN                        0x24
> +#define VFF_THRE               0x28
> +#define VFF_WPT                        0x2c
> +#define VFF_RPT                        0x30
> +/*TX: the buffer size HW can read. RX: the buffer size SW can read.*/

nit: Spaces after /* and before */ (and a lot more occurences below,
please fix them all).

> +#define VFF_VALID_SIZE         0x3c
> +/*TX: the buffer size SW can write. RX: the buffer size HW can write.*/
> +#define VFF_LEFT_SIZE          0x40
> +#define VFF_DEBUG_STATUS       0x50
> +#define VFF_4G_SUPPORT         0x54
> +
> +struct mtk_uart_apdmadev {
> +       struct dma_device ddev;
> +       struct clk *clk;
> +       bool support_33bits;
> +       unsigned int dma_irq[MTK_UART_APDMA_CHANNELS];
> +};
> +
> +struct mtk_uart_apdma_desc {
> +       struct virt_dma_desc vd;
> +
> +       unsigned int avail_len;
> +};
> +
> +struct mtk_chan {
> +       struct virt_dma_chan vc;
> +       struct dma_slave_config cfg;
> +       void __iomem *base;
> +       struct mtk_uart_apdma_desc *desc;
> +
> +       bool requested;
> +
> +       unsigned int rx_status;
> +};
> +
> +static inline struct mtk_uart_apdmadev *
> +to_mtk_uart_apdma_dev(struct dma_device *d)
> +{
> +       return container_of(d, struct mtk_uart_apdmadev, ddev);
> +}
> +
> +static inline struct mtk_chan *to_mtk_uart_apdma_chan(struct dma_chan *c)
> +{
> +       return container_of(c, struct mtk_chan, vc.chan);
> +}
> +
> +static inline struct mtk_uart_apdma_desc *to_mtk_uart_apdma_desc
> +       (struct dma_async_tx_descriptor *t)
> +{
> +       return container_of(t, struct mtk_uart_apdma_desc, vd.tx);
> +}
> +
> +static void mtk_uart_apdma_write(struct mtk_chan *c,
> +                              unsigned int reg, unsigned int val)
> +{
> +       writel(val, c->base + reg);
> +}
> +
> +static unsigned int mtk_uart_apdma_read(struct mtk_chan *c, unsigned int reg)
> +{
> +       return readl(c->base + reg);
> +}
> +
> +static void mtk_uart_apdma_desc_free(struct virt_dma_desc *vd)
> +{
> +       struct dma_chan *chan = vd->tx.chan;
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +
> +       kfree(c->desc);
> +}
> +
> +static void mtk_uart_apdma_start_tx(struct mtk_chan *c)
> +{
> +       unsigned int len, send, left, wpt, d_wpt, tmp;
> +       int ret;
> +
> +       left = mtk_uart_apdma_read(c, VFF_LEFT_SIZE);
> +       if (!left) {
> +               mtk_uart_apdma_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> +               return;
> +       }
> +
> +       /* Wait 1sec for flush,  can't sleep*/

nit: one space after ',', period after 'sleep', space before '*'.

> +       ret = readx_poll_timeout(readl, c->base + VFF_FLUSH, tmp,
> +                       tmp != VFF_FLUSH_B, 0, 1000000);
> +       if (ret)
> +               dev_warn(c->vc.chan.device->dev, "tx: fail, debug=0x%x\n",
> +                       mtk_uart_apdma_read(c, VFF_DEBUG_STATUS));

Why do we need to wait for flush now? The previous implementation did
not require this...

> +
> +       send = min_t(unsigned int, left, c->desc->avail_len);
> +       wpt = mtk_uart_apdma_read(c, VFF_WPT);
> +       len = mtk_uart_apdma_read(c, VFF_LEN);
> +
> +       d_wpt = wpt + send;
> +       if ((d_wpt & VFF_RING_SIZE) >= len) {

I don't get why you need to add "& VFF_RING_SIZE". If wpt + send >
VFF_RING_SIZE, don't you need to toggle VFF_RING_WRAP too?

> +               d_wpt = d_wpt - len;
> +               d_wpt = d_wpt ^ VFF_RING_WRAP;
> +       }
> +       mtk_uart_apdma_write(c, VFF_WPT, d_wpt);
> +
> +       c->desc->avail_len -= send;
> +
> +       mtk_uart_apdma_write(c, VFF_INT_EN, VFF_TX_INT_EN_B);
> +       if (mtk_uart_apdma_read(c, VFF_FLUSH) == 0U)
> +               mtk_uart_apdma_write(c, VFF_FLUSH, VFF_FLUSH_B);
> +}

(thanks for the rest of the changes, this looks much more readable)

> +
> +static void mtk_uart_apdma_start_rx(struct mtk_chan *c)
> +{
> +       struct mtk_uart_apdma_desc *d = c->desc;
> +       unsigned int len, wg, rg, cnt;
> +
> +       if ((mtk_uart_apdma_read(c, VFF_VALID_SIZE) == 0U) ||
> +               !d || !vchan_next_desc(&c->vc))
> +               return;
> +
> +       len = mtk_uart_apdma_read(c, VFF_LEN);
> +       rg = mtk_uart_apdma_read(c, VFF_RPT);
> +       wg = mtk_uart_apdma_read(c, VFF_WPT);
> +       if ((rg ^ wg) & VFF_RING_WRAP)
> +               cnt = (wg & VFF_RING_SIZE) + len - (rg & VFF_RING_SIZE);
> +       else
> +               cnt = (wg & VFF_RING_SIZE) - (rg & VFF_RING_SIZE);
> +
> +       c->rx_status = cnt;
> +       mtk_uart_apdma_write(c, VFF_RPT, wg);
> +
> +       list_del(&d->vd.node);
> +       vchan_cookie_complete(&d->vd);
> +}
> +
> +static irqreturn_t mtk_uart_apdma_irq_handler(int irq, void *dev_id)
> +{
> +       struct dma_chan *chan = (struct dma_chan *)dev_id;
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       struct mtk_uart_apdma_desc *d;
> +       unsigned long flags;
> +
> +       spin_lock_irqsave(&c->vc.lock, flags);
> +       if (c->cfg.direction == DMA_DEV_TO_MEM) {
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> +               mtk_uart_apdma_start_rx(c);
> +       } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> +               d = c->desc;
> +
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> +
> +               if (d->avail_len != 0U) {
> +                       mtk_uart_apdma_start_tx(c);
> +               } else {
> +                       list_del(&d->vd.node);
> +                       vchan_cookie_complete(&d->vd);
> +               }
> +       }
> +       spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int mtk_uart_apdma_alloc_chan_resources(struct dma_chan *chan)
> +{
> +       struct mtk_uart_apdmadev *mtkd = to_mtk_uart_apdma_dev(chan->device);
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       u32 tmp;

In the rest of the code, you use `unsigned int` as type. I think u32
is a little bit better, but please be consistent.

> +       int ret;
> +
> +       pm_runtime_get_sync(mtkd->ddev.dev);
> +
> +       mtk_uart_apdma_write(c, VFF_ADDR, 0);
> +       mtk_uart_apdma_write(c, VFF_THRE, 0);
> +       mtk_uart_apdma_write(c, VFF_LEN, 0);
> +       mtk_uart_apdma_write(c, VFF_RST, VFF_WARM_RST_B);
> +
> +       ret = readx_poll_timeout(readl, c->base + VFF_EN, tmp,
> +                       tmp == 0, 10, 100);
> +       if (ret) {
> +               dev_err(chan->device->dev, "dma reset: fail, timeout\n");
> +               return ret;
> +       }
> +
> +       if (!c->requested) {
> +               c->requested = true;
> +               ret = request_irq(mtkd->dma_irq[chan->chan_id],
> +                                 mtk_uart_apdma_irq_handler, IRQF_TRIGGER_NONE,
> +                                 KBUILD_MODNAME, chan);
> +               if (ret < 0) {
> +                       dev_err(chan->device->dev, "Can't request dma IRQ\n");
> +                       return -EINVAL;
> +               }
> +       }
> +
> +       if (mtkd->support_33bits)
> +               mtk_uart_apdma_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_CLR_B);
> +
> +       return ret;
> +}
> +
> +static void mtk_uart_apdma_free_chan_resources(struct dma_chan *chan)
> +{
> +       struct mtk_uart_apdmadev *mtkd = to_mtk_uart_apdma_dev(chan->device);
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +
> +       if (c->requested) {
> +               c->requested = false;
> +               free_irq(mtkd->dma_irq[chan->chan_id], chan);
> +       }
> +
> +       tasklet_kill(&c->vc.task);
> +
> +       vchan_free_chan_resources(&c->vc);
> +
> +       pm_runtime_put_sync(mtkd->ddev.dev);
> +}
> +
> +static enum dma_status mtk_uart_apdma_tx_status(struct dma_chan *chan,
> +                                        dma_cookie_t cookie,
> +                                        struct dma_tx_state *txstate)
> +{
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       enum dma_status ret;
> +       unsigned long flags;
> +
> +       if (!txstate)
> +               return DMA_ERROR;
> +
> +       ret = dma_cookie_status(chan, cookie, txstate);
> +       spin_lock_irqsave(&c->vc.lock, flags);
> +       if (ret == DMA_IN_PROGRESS) {
> +               c->rx_status = mtk_uart_apdma_read(c, VFF_RPT) & VFF_RING_SIZE;
> +               dma_set_residue(txstate, c->rx_status);
> +       } else if (ret == DMA_COMPLETE && c->cfg.direction == DMA_DEV_TO_MEM) {
> +               dma_set_residue(txstate, c->rx_status);
> +       } else {
> +               dma_set_residue(txstate, 0);
> +       }
> +       spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> +       return ret;
> +}
> +
> +/*
> + * dmaengine_prep_slave_single will call the function. and sglen is 1.
> + * 8250 uart using one ring buffer, and deal with one sg.
> + */
> +static struct dma_async_tx_descriptor *mtk_uart_apdma_prep_slave_sg
> +       (struct dma_chan *chan, struct scatterlist *sgl,
> +       unsigned int sglen, enum dma_transfer_direction dir,
> +       unsigned long tx_flags, void *context)
> +{
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       struct mtk_uart_apdma_desc *d;
> +
> +       if ((dir != DMA_DEV_TO_MEM) &&
> +               (dir != DMA_MEM_TO_DEV)) {

This line fits in 80 chars.

> +               dev_err(chan->device->dev, "bad direction\n");
> +               return NULL;
> +       }
> +
> +       /* Now allocate and setup the descriptor */
> +       d = kzalloc(sizeof(*d), GFP_ATOMIC);
> +       if (!d)
> +               return NULL;
> +
> +       /* sglen is 1 */
> +       d->avail_len = sg_dma_len(sgl);
> +
> +       return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
> +}
> +
> +static void mtk_uart_apdma_issue_pending(struct dma_chan *chan)
> +{
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       struct virt_dma_desc *vd;
> +       unsigned long flags;
> +
> +       spin_lock_irqsave(&c->vc.lock, flags);
> +       if (c->cfg.direction == DMA_DEV_TO_MEM) {
> +               if (vchan_issue_pending(&c->vc)) {
> +                       vd = vchan_next_desc(&c->vc);
> +                       c->desc = to_mtk_uart_apdma_desc(&vd->tx);
> +                       mtk_uart_apdma_start_rx(c);
> +               }
> +       } else if (c->cfg.direction == DMA_MEM_TO_DEV) {
> +               if (vchan_issue_pending(&c->vc)) {
> +                       vd = vchan_next_desc(&c->vc);
> +                       c->desc = to_mtk_uart_apdma_desc(&vd->tx);
> +                       mtk_uart_apdma_start_tx(c);
> +               }
> +       }
> +       spin_unlock_irqrestore(&c->vc.lock, flags);
> +}
> +
> +static int mtk_uart_apdma_slave_config(struct dma_chan *chan,
> +                               struct dma_slave_config *cfg)
> +{
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       struct mtk_uart_apdmadev *mtkd =
> +                               to_mtk_uart_apdma_dev(c->vc.chan.device);
> +
> +       c->cfg = *cfg;
> +
> +       if (cfg->direction == DMA_DEV_TO_MEM) {
> +               unsigned int rx_len = cfg->src_addr_width * 1024;
> +
> +               mtk_uart_apdma_write(c, VFF_ADDR, cfg->src_addr);
> +               mtk_uart_apdma_write(c, VFF_LEN, rx_len);
> +               mtk_uart_apdma_write(c, VFF_THRE, VFF_RX_THRE(rx_len));
> +               mtk_uart_apdma_write(c, VFF_INT_EN,
> +                               VFF_RX_INT_EN0_B | VFF_RX_INT_EN1_B);
> +               mtk_uart_apdma_write(c, VFF_RPT, 0);
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> +               mtk_uart_apdma_write(c, VFF_EN, VFF_EN_B);
> +       } else if (cfg->direction == DMA_MEM_TO_DEV)    {
> +               unsigned int tx_len = cfg->dst_addr_width * 1024;
> +
> +               mtk_uart_apdma_write(c, VFF_ADDR, cfg->dst_addr);
> +               mtk_uart_apdma_write(c, VFF_LEN, tx_len);
> +               mtk_uart_apdma_write(c, VFF_THRE, VFF_TX_THRE(tx_len));
> +               mtk_uart_apdma_write(c, VFF_WPT, 0);
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> +               mtk_uart_apdma_write(c, VFF_EN, VFF_EN_B);
> +       }
> +
> +       if (mtkd->support_33bits)
> +               mtk_uart_apdma_write(c, VFF_4G_SUPPORT, VFF_4G_SUPPORT_B);
> +
> +       if (mtk_uart_apdma_read(c, VFF_EN) != VFF_EN_B) {
> +               dev_err(chan->device->dev, "dir[%d] fail\n", cfg->direction);
> +               return -EINVAL;
> +       }
> +
> +       return 0;
> +}
> +
> +static int mtk_uart_apdma_terminate_all(struct dma_chan *chan)
> +{
> +       struct mtk_chan *c = to_mtk_uart_apdma_chan(chan);
> +       unsigned long flags;
> +       u32 tmp;
> +       int ret;
> +
> +       spin_lock_irqsave(&c->vc.lock, flags);
> +
> +       mtk_uart_apdma_write(c, VFF_FLUSH, VFF_FLUSH_B);
> +       /* Wait 1sec for flush,  can't sleep*/

ditto about comment format

> +       ret = readx_poll_timeout(readl, c->base + VFF_FLUSH, tmp,
> +                       tmp != VFF_FLUSH_B, 0, 1000000);
> +       if (ret)
> +               dev_err(c->vc.chan.device->dev, "flush: fail, debug=0x%x\n",
> +                       mtk_uart_apdma_read(c, VFF_DEBUG_STATUS));
> +
> +       /*set stop as 1 -> wait until en is 0 -> set stop as 0*/
> +       mtk_uart_apdma_write(c, VFF_STOP, VFF_STOP_B);
> +       ret = readx_poll_timeout(readl, c->base + VFF_EN, tmp,
> +                       tmp == 0, 10, 100);
> +       if (ret)
> +               dev_err(c->vc.chan.device->dev, "stop: fail, debug=0x%x\n",
> +                       mtk_uart_apdma_read(c, VFF_DEBUG_STATUS));
> +
> +       mtk_uart_apdma_write(c, VFF_STOP, VFF_STOP_CLR_B);
> +       mtk_uart_apdma_write(c, VFF_INT_EN, VFF_INT_EN_CLR_B);
> +
> +       if (c->cfg.direction == DMA_DEV_TO_MEM)
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_RX_INT_FLAG_CLR_B);
> +       else if (c->cfg.direction == DMA_MEM_TO_DEV)
> +               mtk_uart_apdma_write(c, VFF_INT_FLAG, VFF_TX_INT_FLAG_CLR_B);
> +
> +       spin_unlock_irqrestore(&c->vc.lock, flags);
> +
> +       return 0;
> +}
> +
> +static int mtk_uart_apdma_device_pause(struct dma_chan *chan)
> +{
> +       /* just for check caps pass */
> +       return 0;
> +}

This is still not right... Hopefully somebody more familiar with the
DMA subsystem can weigh in, but maybe it's enough to wait for the
current transfer to be flushed and temporarily disable interrupts?
e.g. call mtk_uart_apdma_terminate_all above?

> +
> +static int mtk_uart_apdma_device_resume(struct dma_chan *chan)
> +{
> +       /* just for check caps pass */
> +       return 0;
> +}

Drop this one since you don't really need it.

> +
> +static void mtk_uart_apdma_free(struct mtk_uart_apdmadev *mtkd)
> +{
> +       while (list_empty(&mtkd->ddev.channels) == 0) {

!list_empty(

> +               struct mtk_chan *c = list_first_entry(&mtkd->ddev.channels,
> +                       struct mtk_chan, vc.chan.device_node);
> +
> +               list_del(&c->vc.chan.device_node);
> +               tasklet_kill(&c->vc.task);
> +       }
> +}
> +
> +static const struct of_device_id mtk_uart_apdma_match[] = {
> +       { .compatible = "mediatek,mt6577-uart-dma", },
> +       { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_uart_apdma_match);
> +
> +static int mtk_uart_apdma_probe(struct platform_device *pdev)
> +{
> +       struct mtk_uart_apdmadev *mtkd;
> +       struct resource *res;
> +       struct mtk_chan *c;
> +       unsigned int i;
> +       int rc;
> +
> +       mtkd = devm_kzalloc(&pdev->dev, sizeof(*mtkd), GFP_KERNEL);
> +       if (!mtkd)
> +               return -ENOMEM;
> +
> +       mtkd->clk = devm_clk_get(&pdev->dev, NULL);
> +       if (IS_ERR(mtkd->clk)) {
> +               dev_err(&pdev->dev, "No clock specified\n");
> +               rc = PTR_ERR(mtkd->clk);
> +               return rc;
> +       }
> +
> +       if (of_property_read_bool(pdev->dev.of_node, "dma-33bits"))
> +               mtkd->support_33bits = true;

I don't think this should be a device tree property. Typically we'd
have multiple compatible strings for (slightly) different HW blocks,
and enable 33bits only on HW that have support.

See how it's done in drivers/i2c/busses/i2c-mt65xx.c, for example.

> +
> +       rc = dma_set_mask_and_coherent(&pdev->dev,
> +                               DMA_BIT_MASK(32 | mtkd->support_33bits));

I'd feel a little more confortable if you used a variable instead:

int dma_bits = 32;

if (support_33bits)
   dma_bits = 33;

..., DMA_BIT_MASK(dma_bits));

> +       if (rc)
> +               return rc;
> +
> +       dma_cap_set(DMA_SLAVE, mtkd->ddev.cap_mask);
> +       mtkd->ddev.device_alloc_chan_resources =
> +                               mtk_uart_apdma_alloc_chan_resources;
> +       mtkd->ddev.device_free_chan_resources =
> +                               mtk_uart_apdma_free_chan_resources;
> +       mtkd->ddev.device_tx_status = mtk_uart_apdma_tx_status;
> +       mtkd->ddev.device_issue_pending = mtk_uart_apdma_issue_pending;
> +       mtkd->ddev.device_prep_slave_sg = mtk_uart_apdma_prep_slave_sg;
> +       mtkd->ddev.device_config = mtk_uart_apdma_slave_config;
> +       mtkd->ddev.device_pause = mtk_uart_apdma_device_pause;
> +       mtkd->ddev.device_resume = mtk_uart_apdma_device_resume;
> +       mtkd->ddev.device_terminate_all = mtk_uart_apdma_terminate_all;
> +       mtkd->ddev.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> +       mtkd->ddev.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE);
> +       mtkd->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
> +       mtkd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
> +       mtkd->ddev.dev = &pdev->dev;
> +       INIT_LIST_HEAD(&mtkd->ddev.channels);
> +
> +       for (i = 0; i < MTK_UART_APDMA_CHANNELS; i++) {
> +               c = devm_kzalloc(mtkd->ddev.dev, sizeof(*c), GFP_KERNEL);
> +               if (!c) {
> +                       rc = -ENODEV;
> +                       goto err_no_dma;
> +               }
> +
> +               res = platform_get_resource(pdev, IORESOURCE_MEM, i);
> +               if (!res) {
> +                       rc = -ENODEV;
> +                       goto err_no_dma;
> +               }
> +
> +               c->base = devm_ioremap_resource(&pdev->dev, res);
> +               if (IS_ERR(c->base)) {
> +                       rc = PTR_ERR(c->base);
> +                       goto err_no_dma;
> +               }
> +               c->requested = false;
> +               c->vc.desc_free = mtk_uart_apdma_desc_free;
> +               vchan_init(&c->vc, &mtkd->ddev);
> +
> +               mtkd->dma_irq[i] = platform_get_irq(pdev, i);
> +               if ((int)mtkd->dma_irq[i] < 0) {
> +                       dev_err(&pdev->dev, "failed to get IRQ[%d]\n", i);
> +                       rc = -EINVAL;
> +                       goto err_no_dma;
> +               }
> +       }
> +
> +       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_set_active(&pdev->dev);
> +
> +       rc = dma_async_device_register(&mtkd->ddev);
> +       if (rc)
> +               goto rpm_disable;
> +
> +       platform_set_drvdata(pdev, mtkd);
> +
> +       if (pdev->dev.of_node) {
> +               /* Device-tree DMA controller registration */
> +               rc = of_dma_controller_register(pdev->dev.of_node,
> +                                               of_dma_xlate_by_chan_id,
> +                                               mtkd);
> +               if (rc)
> +                       goto dma_remove;
> +       }
> +
> +       return rc;
> +
> +dma_remove:
> +       dma_async_device_unregister(&mtkd->ddev);
> +rpm_disable:
> +       pm_runtime_disable(&pdev->dev);
> +err_no_dma:
> +       mtk_uart_apdma_free(mtkd);
> +       return rc;
> +}
> +
> +static int mtk_uart_apdma_remove(struct platform_device *pdev)
> +{
> +       struct mtk_uart_apdmadev *mtkd = platform_get_drvdata(pdev);
> +
> +       if (pdev->dev.of_node)
> +               of_dma_controller_free(pdev->dev.of_node);
> +
> +       pm_runtime_disable(&pdev->dev);
> +       pm_runtime_put_noidle(&pdev->dev);
> +
> +       dma_async_device_unregister(&mtkd->ddev);
> +       mtk_uart_apdma_free(mtkd);
> +
> +       return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int mtk_uart_apdma_suspend(struct device *dev)
> +{
> +       struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> +       if (!pm_runtime_suspended(dev))
> +               clk_disable_unprepare(mtkd->clk);
> +
> +       return 0;
> +}
> +
> +static int mtk_uart_apdma_resume(struct device *dev)
> +{
> +       int ret;
> +       struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> +       if (!pm_runtime_suspended(dev)) {
> +               ret = clk_prepare_enable(mtkd->clk);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int mtk_uart_apdma_runtime_suspend(struct device *dev)
> +{
> +       struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> +       clk_disable_unprepare(mtkd->clk);
> +
> +       return 0;
> +}
> +
> +static int mtk_uart_apdma_runtime_resume(struct device *dev)
> +{
> +       int ret;
> +       struct mtk_uart_apdmadev *mtkd = dev_get_drvdata(dev);
> +
> +       ret = clk_prepare_enable(mtkd->clk);
> +       if (ret)
> +               return ret;
> +
> +       return 0;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops mtk_uart_apdma_pm_ops = {
> +       SET_SYSTEM_SLEEP_PM_OPS(mtk_uart_apdma_suspend, mtk_uart_apdma_resume)
> +       SET_RUNTIME_PM_OPS(mtk_uart_apdma_runtime_suspend,
> +                          mtk_uart_apdma_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver mtk_uart_apdma_driver = {
> +       .probe  = mtk_uart_apdma_probe,
> +       .remove = mtk_uart_apdma_remove,
> +       .driver = {
> +               .name           = KBUILD_MODNAME,
> +               .pm             = &mtk_uart_apdma_pm_ops,
> +               .of_match_table = of_match_ptr(mtk_uart_apdma_match),
> +       },
> +};
> +
> +module_platform_driver(mtk_uart_apdma_driver);
> +
> +MODULE_DESCRIPTION("MediaTek UART APDMA Controller Driver");
> +MODULE_AUTHOR("Long Cheng <long.cheng@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +
> diff --git a/drivers/dma/mediatek/Kconfig b/drivers/dma/mediatek/Kconfig
> index 27bac0b..1a523c87 100644
> --- a/drivers/dma/mediatek/Kconfig
> +++ b/drivers/dma/mediatek/Kconfig
> @@ -1,4 +1,15 @@
>
> +config DMA_MTK_UART
> +       tristate "MediaTek SoCs APDMA support for UART"
> +       depends on OF && SERIAL_8250_MT6577
> +       select DMA_ENGINE
> +       select DMA_VIRTUAL_CHANNELS
> +       help
> +         Support for the UART DMA engine found on MediaTek MTK SoCs.
> +         when SERIAL_8250_MT6577 is enabled, and if you want to use DMA,
> +         you can enable the config. the DMA engine can only be used
> +         with MediaTek SoCs.
> +
>  config MTK_HSDMA
>         tristate "MediaTek High-Speed DMA controller support"
>         depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/dma/mediatek/Makefile b/drivers/dma/mediatek/Makefile
> index 6e778f8..2f2efd9 100644
> --- a/drivers/dma/mediatek/Makefile
> +++ b/drivers/dma/mediatek/Makefile
> @@ -1 +1,2 @@
> +obj-$(CONFIG_DMA_MTK_UART) += 8250_mtk_dma.o
>  obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o
> --
> 1.7.9.5
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux