On Tue, Jan 1, 2019 at 11:59 AM Yong Wu <yong.wu@xxxxxxxxxxxx> wrote:
>
> The register VLD_PA_RNG(0x118) was forgot to backup while adding 4GB
> mode support for mt2712. this patch add it.
>
> Fixes: 30e2fccf9512 ("iommu/mediatek: Enlarge the validate PA range
> for 4GB mode")
> Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> ---
> drivers/iommu/mtk_iommu.c | 2 ++
> drivers/iommu/mtk_iommu.h | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 7fcef19..ddf1969 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -716,6 +716,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
> reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
> reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
> reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
> + reg->vld_pa_range = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
Don't we want to add:
if (data->plat_data->vld_pa_rng)
before this save/restore operation? Or it doesn't matter?
> clk_disable_unprepare(data->bclk);
> return 0;
> }
> @@ -740,6 +741,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
> writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
> writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
> + writel_relaxed(reg->vld_pa_range, base + REG_MMU_VLD_PA_RNG);
> if (m4u_dom)
> writel(m4u_dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
> base + REG_MMU_PT_BASE_ADDR);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index 0a7c463..c500bfd 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -33,6 +33,7 @@ struct mtk_iommu_suspend_reg {
> u32 int_control0;
> u32 int_main_control;
> u32 ivrp_paddr;
> + u32 vld_pa_range;
Well, please be consistent ,-) Either vld_pa_rng, or valid_pa_range ,-)
> };
>
> enum mtk_iommu_plat {
> --
> 1.9.1
>
