Re: [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 5, 2018 at 4:38 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Tue, Nov 20, 2018 at 09:27:51AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > Add PCIe Gen4 controller DT bindings of NXP Layerscape SoCs.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> > V2:
> >  - Change to use the layerscape-pci.txt for PCIe Gen4 controller
> >    dt-bindings
>
> Sorry someone suggested this, but it seems there's no point in having
> these in the same file. New IP block, do a new file.
>
> >
> >  .../bindings/pci/layerscape-pci.txt           | 57 +++++++++++++++++++
> >  MAINTAINERS                                   |  8 +++
> >  2 files changed, 65 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index 66df1e81e0b8..3ef8836b6e97 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -1,4 +1,6 @@
> > +====================================
> >  Freescale Layerscape PCIe controller
> > +====================================
> >
> >  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> >  and thus inherits all the common properties defined in designware-pcie.txt.
> > @@ -58,3 +60,58 @@ Example:
> >                               <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> >                               <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
> >       };
> > +
> > +===================================
> > +NXP Layerscape PCIe Gen4 controller
> > +===================================
> > +
> > +This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
> > +the common properties defined in mobiveil-pcie.txt.
> > +
> > +Required properties:
> > +- compatible: should contain the platform identifier such as:
> > +  "fsl,lx2160a-pcie"
> > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > +  "config_axi_slave": PCIe controller registers
> > +  "csr_axi_slave": Bridge config registers
>
> Wouldn't 'config' and 'csr' be sufficient? And these should be listed
> under reg-names.

NM on the names. I see these are inherited.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux