RE: [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe Gen4 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thanks a lot for your comments!

> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: 2018年12月6日 6:39
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> bhelgaas@xxxxxxxxxx; mark.rutland@xxxxxxx;
> l.subrahmanya@xxxxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; lorenzo.pieralisi@xxxxxxx;
> catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; Mingkai Hu
> <mingkai.hu@xxxxxxx>; M.h. Lian <minghuan.lian@xxxxxxx>; Xiaowei Bao
> <xiaowei.bao@xxxxxxx>
> Subject: Re: [PATCHv2 22/25] dt-bindings: pci: Add NXP Layerscape SoCs PCIe
> Gen4 controller
> 
> On Tue, Nov 20, 2018 at 09:27:51AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > Add PCIe Gen4 controller DT bindings of NXP Layerscape SoCs.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> > V2:
> >  - Change to use the layerscape-pci.txt for PCIe Gen4 controller
> >    dt-bindings
> 
> Sorry someone suggested this, but it seems there's no point in having these in
> the same file. New IP block, do a new file.

Leo, can you help comment on this? I'm not sure which one is better.

> 
> >
> >  .../bindings/pci/layerscape-pci.txt           | 57
> +++++++++++++++++++
> >  MAINTAINERS                                   |  8 +++
> >  2 files changed, 65 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index 66df1e81e0b8..3ef8836b6e97 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -1,4 +1,6 @@
> > +====================================
> >  Freescale Layerscape PCIe controller
> > +====================================
> >
> >  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> > and thus inherits all the common properties defined in designware-pcie.txt.
> > @@ -58,3 +60,58 @@ Example:
> >  				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> >  				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
> >  	};
> > +
> > +===================================
> > +NXP Layerscape PCIe Gen4 controller
> > +===================================
> > +
> > +This PCIe controller is based on the Mobiveil PCIe IP and thus
> > +inherits all the common properties defined in mobiveil-pcie.txt.
> > +
> > +Required properties:
> > +- compatible: should contain the platform identifier such as:
> > +  "fsl,lx2160a-pcie"
> > +- reg: base addresses and lengths of the PCIe controller register blocks.
> > +  "config_axi_slave": PCIe controller registers
> > +  "csr_axi_slave": Bridge config registers
> 
> Wouldn't 'config' and 'csr' be sufficient? And these should be listed under
> reg-names.
> 
> > +- interrupts: A list of interrupt outputs of the controller. Must
> > +contain an
> > +  entry for each entry in the interrupt-names property.
> > +- interrupt-names: It could include the following entries:
> > +  "intr": The interrupt that is asserted for controller interrupts
> > +  "aer": Asserted for aer interrupt when chip support the aer interrupt
> with
> > +	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
> > +  "pme": Asserted for pme interrupt when chip support the pme interrupt
> with
> > +	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
> > +- dma-coherent: Indicates that the hardware IP block can ensure the
> > +coherency
> > +  of the data transferred from/to the IP block. This can avoid the
> > +software
> > +  cache flush/invalid actions, and improve the performance significantly.
> > +- msi-parent : See the generic MSI binding described in
> > +  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
> > +
> > +Example:
> > +
> > +	pcie@3400000 {
> > +		compatible = "fsl,lx2160a-pcie";
> > +		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers
> */
> > +		       0x80 0x00000000 0x0 0x00001000>; /* configuration space
> */
> > +		reg-names = "csr_axi_slave", "config_axi_slave";
> 
> The order should match what's defined above.

Yes, will change the order above in next version.

> 
> Also, normally the config space would be the bigger region unless config
> accesses are windowed.

Yes, config accesses are windowed.

> 
> > +		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER
> interrupt */
> > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt
> */
> > +			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller
> interrupt */
> > +		interrupt-names = "aer", "pme", "intr";
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +		device_type = "pci";
> > +		apio-wins = <8>;
> > +		ppio-wins = <8>;
> 
> If these have specific values on your h/w, please specify above.

Confirmed with our HW team that PCIe@3600000 and PCIe@3800000 have different window number, will update the window number in next version.

> 
> > +		dma-coherent;
> > +		bus-range = <0x0 0xff>;
> > +		msi-parent = <&its>;
> > +		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
> 0x40000000>;
> > +		#interrupt-cells = <1>;
> > +		interrupt-map-mask = <0 0 0 7>;
> > +		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109
> IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 2 &gic 0 0 GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 3 &gic 0 0 GIC_SPI 111
> IRQ_TYPE_LEVEL_HIGH>,
> > +				<0000 0 0 4 &gic 0 0 GIC_SPI 112
> IRQ_TYPE_LEVEL_HIGH>;
> > +	};

Thanks,
Zhiqiang




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux