Re: [PATCH v2 03/12] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 20, 2018 at 9:15 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Mon, Nov 19, 2018 at 04:30:37PM +0530, Jagan Teki wrote:
> > On Mon, Nov 19, 2018 at 2:00 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > >
> > > On Fri, Nov 16, 2018 at 10:09:07PM +0530, Jagan Teki wrote:
> > > > Burst mode display timings are different from convectional
> > > > video mode so update the horizontal and vertical timings.
> > > >
> > > > Reference code taken from BSP (from linux-sunxi/
> > > > drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> > > >
> > > > dsi_hsa  = 0;
> > > > dsi_hbp  = 0;
> > > > dsi_hact = x*dsi_pixel_bits[format]/8;
> > > > dsi_hblk = dsi_hact;
> > > > dsi_hfp  = 0;
> > > > dsi_vblk = 0;
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > >
> > > How is that matching the code you have in the rest of your patch?
> >
> > +       if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> > +               timings.hblk = (mode->hdisplay * Bpp);
> > +       else
> > +               sun6i_dsi_get_timings(dsi, mode, &timings);
> >
> > It's again your request to "keep the couple of function to make more
> > readable"
>
> That function in particular doesn't make it much more readable, but
> more importantly, your commit log doesn't match what you code does.

May be I can update the commit message if the function is OK. for
burst most of the timings are 0 so I used structure with memset to
keep not assigning 0's explicitly. otherwise do you have any
suggestions, please let me know.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux