Re: [PATCH v4 08/10] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2018-10-04四的 20:28 +0800,Icenowy Zheng写道:
> Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also
> controlled).
> 
> Add a driver for it.
> 
> The register operations in this driver is mainly extracted from the
> BSP
> USB3 driver.
> 
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>

Kishon, I see this patch is picked to linux-next, however this patch is
not in the stage that can be picked, because for the Vbus of USB3 PHY
Rob Herring still have some problems.

Could you remove PATCH 7 and 8 in this patchset now?

Thanks!

> ---
> Changes in v4:
> - Added support for vbus-supply property.
> 
> Changes in v3:
> - Dropped USB_SUPPORT dependency.
> - Added Chen-Yu's Review tag.
> 
> No changes in v2, v1.
> 
>  drivers/phy/allwinner/Kconfig           |  12 ++
>  drivers/phy/allwinner/Makefile          |   1 +
>  drivers/phy/allwinner/phy-sun50i-usb3.c | 239
> ++++++++++++++++++++++++
>  3 files changed, 252 insertions(+)
>  create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c
> 
> diff --git a/drivers/phy/allwinner/Kconfig
> b/drivers/phy/allwinner/Kconfig
> index cdc1e745ba47..064096e6a4e5 100644
> --- a/drivers/phy/allwinner/Kconfig
> +++ b/drivers/phy/allwinner/Kconfig
> @@ -29,3 +29,15 @@ config PHY_SUN9I_USB
>  	  sun9i SoCs.
>  
>  	  This driver controls each individual USB 2 host PHY.
> +
> +config PHY_SUN50I_USB3
> +	tristate "Allwinner sun50i SoC USB3 PHY driver"
> +	depends on ARCH_SUNXI && HAS_IOMEM && OF
> +	depends on RESET_CONTROLLER
> +	select USB_COMMON
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the USB3.0-capable transceiver that is
> +	  part of some Allwinner sun50i SoCs.
> +
> +	  This driver controls each individual USB 2+3 host PHY combo.
> diff --git a/drivers/phy/allwinner/Makefile
> b/drivers/phy/allwinner/Makefile
> index 8605529c01a1..a8d01e9073c2 100644
> --- a/drivers/phy/allwinner/Makefile
> +++ b/drivers/phy/allwinner/Makefile
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
>  obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
> +obj-$(CONFIG_PHY_SUN50I_USB3)		+= phy-sun50i-usb3.o
> diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c
> b/drivers/phy/allwinner/phy-sun50i-usb3.c
> new file mode 100644
> index 000000000000..70c299c01c3e
> --- /dev/null
> +++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
> @@ -0,0 +1,239 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Allwinner sun50i(H6) USB 3.0 phy driver
> + *
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@xxxxxxx>
> + *
> + * Based on phy-sun9i-usb.c, which is:
> + *
> + * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@xxxxxxxx>
> + *
> + * Based on code from Allwinner BSP, which is:
> + *
> + * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/usb/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +
> +/* Interface Status and Control Registers */
> +#define SUNXI_ISCR			0x00
> +#define SUNXI_PIPE_CLOCK_CONTROL	0x14
> +#define SUNXI_PHY_TUNE_LOW		0x18
> +#define SUNXI_PHY_TUNE_HIGH		0x1c
> +#define SUNXI_PHY_EXTERNAL_CONTROL	0x20
> +
> +/* USB2.0 Interface Status and Control Register */
> +#define SUNXI_ISCR_FORCE_VBUS		(3 << 12)
> +
> +/* PIPE Clock Control Register */
> +#define SUNXI_PCC_PIPE_CLK_OPEN		(1 << 6)
> +
> +/* PHY External Control Register */
> +#define SUNXI_PEC_EXTERN_VBUS		(3 << 1)
> +#define SUNXI_PEC_SSC_EN		(1 << 24)
> +#define SUNXI_PEC_REF_SSP_EN		(1 << 26)
> +
> +/* PHY Tune High Register */
> +#define SUNXI_TX_DEEMPH_3P5DB(n)	((n) << 19)
> +#define SUNXI_TX_DEEMPH_3P5DB_MASK	GENMASK(24, 19)
> +#define SUNXI_TX_DEEMPH_6DB(n)		((n) << 13)
> +#define SUNXI_TX_DEEMPH_6GB_MASK	GENMASK(18, 13)
> +#define SUNXI_TX_SWING_FULL(n)		((n) << 6)
> +#define SUNXI_TX_SWING_FULL_MASK	GENMASK(12, 6)
> +#define SUNXI_LOS_BIAS(n)		((n) << 3)
> +#define SUNXI_LOS_BIAS_MASK		GENMASK(5, 3)
> +#define SUNXI_TXVBOOSTLVL(n)		((n) << 0)
> +#define SUNXI_TXVBOOSTLVL_MASK		GENMASK(0, 2)
> +
> +struct sun50i_usb3_phy {
> +	struct phy *phy;
> +	void __iomem *regs;
> +	struct reset_control *reset;
> +	struct clk *clk;
> +	bool regulator_on;
> +	struct regulator *vbus;
> +};
> +
> +static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy)
> +{
> +	u32 val;
> +
> +	val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
> +	val |= SUNXI_PEC_EXTERN_VBUS;
> +	val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
> +	writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
> +
> +	val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
> +	val |= SUNXI_PCC_PIPE_CLK_OPEN;
> +	writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
> +
> +	val = readl(phy->regs + SUNXI_ISCR);
> +	val |= SUNXI_ISCR_FORCE_VBUS;
> +	writel(val, phy->regs + SUNXI_ISCR);
> +
> +	/*
> +	 * All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
> +	 * registers are directly taken from the BSP USB3 driver from
> +	 * Allwiner.
> +	 */
> +	writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
> +
> +	val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH);
> +	val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK |
> +		 SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK |
> +		 SUNXI_TX_DEEMPH_3P5DB_MASK);
> +	val |= SUNXI_TXVBOOSTLVL(0x7);
> +	val |= SUNXI_LOS_BIAS(0x7);
> +	val |= SUNXI_TX_SWING_FULL(0x55);
> +	val |= SUNXI_TX_DEEMPH_6DB(0x20);
> +	val |= SUNXI_TX_DEEMPH_3P5DB(0x15);
> +	writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH);
> +}
> +
> +static int sun50i_usb3_phy_init(struct phy *_phy)
> +{
> +	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
> +	int ret;
> +
> +	ret = clk_prepare_enable(phy->clk);
> +	if (ret)
> +		goto err_clk;
> +
> +	ret = reset_control_deassert(phy->reset);
> +	if (ret)
> +		goto err_reset;
> +
> +	sun50i_usb3_phy_open(phy);
> +	return 0;
> +
> +err_reset:
> +	clk_disable_unprepare(phy->clk);
> +
> +err_clk:
> +	return ret;
> +}
> +
> +static int sun50i_usb3_phy_exit(struct phy *_phy)
> +{
> +	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
> +
> +	reset_control_assert(phy->reset);
> +	clk_disable_unprepare(phy->clk);
> +
> +	return 0;
> +}
> +
> +static int sun50i_usb3_phy_power_on(struct phy *_phy)
> +{
> +	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
> +	int ret;
> +
> +	if (!phy->vbus || phy->regulator_on)
> +		return 0;
> +
> +	ret = regulator_enable(phy->vbus);
> +	if (ret)
> +		return ret;
> +
> +	phy->regulator_on = true;
> +
> +	return 0;
> +}
> +
> +static int sun50i_usb3_phy_power_off(struct phy *_phy)
> +{
> +	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
> +
> +	if (!phy->vbus || !phy->regulator_on)
> +		return 0;
> +
> +	regulator_disable(phy->vbus);
> +	phy->regulator_on = false;
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops sun50i_usb3_phy_ops = {
> +	.init		= sun50i_usb3_phy_init,
> +	.exit		= sun50i_usb3_phy_exit,
> +	.power_on	= sun50i_usb3_phy_power_on,
> +	.power_off	= sun50i_usb3_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int sun50i_usb3_phy_probe(struct platform_device *pdev)
> +{
> +	struct sun50i_usb3_phy *phy;
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *phy_provider;
> +	struct resource *res;
> +
> +	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	phy->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(phy->clk)) {
> +		dev_err(dev, "failed to get phy clock\n");
> +		return PTR_ERR(phy->clk);
> +	}
> +
> +	phy->reset = devm_reset_control_get(dev, NULL);
> +	if (IS_ERR(phy->reset)) {
> +		dev_err(dev, "failed to get reset control\n");
> +		return PTR_ERR(phy->reset);
> +	}
> +
> +	phy->vbus = devm_regulator_get_optional(dev, "vbus");
> +	if (IS_ERR(phy->vbus)) {
> +		if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
> +			dev_err(dev, "Couldn't get vbus regulator...
> Deferring probe\n");
> +			return -EPROBE_DEFER;
> +		}
> +
> +		phy->vbus = NULL;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	phy->regs = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(phy->regs))
> +		return PTR_ERR(phy->regs);
> +
> +	phy->phy = devm_phy_create(dev, NULL, &sun50i_usb3_phy_ops);
> +	if (IS_ERR(phy->phy)) {
> +		dev_err(dev, "failed to create PHY\n");
> +		return PTR_ERR(phy->phy);
> +	}
> +
> +	phy_set_drvdata(phy->phy, phy);
> +	phy_provider = devm_of_phy_provider_register(dev,
> of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id sun50i_usb3_phy_of_match[] = {
> +	{ .compatible = "allwinner,sun50i-h6-usb3-phy" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, sun50i_usb3_phy_of_match);
> +
> +static struct platform_driver sun50i_usb3_phy_driver = {
> +	.probe	= sun50i_usb3_phy_probe,
> +	.driver = {
> +		.of_match_table	= sun50i_usb3_phy_of_match,
> +		.name  = "sun50i-usb3-phy",
> +	}
> +};
> +module_platform_driver(sun50i_usb3_phy_driver);
> +
> +MODULE_DESCRIPTION("Allwinner sun50i USB 3.0 phy driver");
> +MODULE_AUTHOR("Icenowy Zheng <icenowy@xxxxxxx>");
> +MODULE_LICENSE("GPL");




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux