This patchset introduces support for the USB ports (both USB2 and USB3) on the Allwinner H6 SoC. The first 6 PATCHes are the USB2 part, and the latter 4 PATCHes are the USB3 part. PATCH 1, 2, 3, 7, 8 should go through the PHY tree, and the remaining patches should go through the armsoc tree via sunxi tree. Icenowy Zheng (10): dt-bindings: phy: add binding for Allwinner H6 USB2 PHY phy: sun4i-usb: add support for missing USB PHY index phy: sun4i-usb: add support for H6 USB2 PHY arm64: allwinner: dts: h6: add USB2-related device nodes arm64: allwinner: dts: h6: add USB Vbus regulator arm64: allwinner: dts: h6: enable USB2 on Pine H64 dt-bindings: phy: add binding for Allwinner USB3 PHY phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC arm64: allwinner: dts: h6: add USB3 device nodes arm64: allwinner: dts: h6: enable USB3 port on Pine H64 .../devicetree/bindings/phy/sun4i-usb-phy.txt | 8 +- .../bindings/phy/sun50i-usb3-phy.txt | 23 ++ .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 46 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 113 +++++++++ drivers/phy/allwinner/Kconfig | 12 + drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun4i-usb.c | 26 +- drivers/phy/allwinner/phy-sun50i-usb3.c | 239 ++++++++++++++++++ 8 files changed, 463 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c -- 2.18.0
