Re: [PATCH v2 7/7] ARM: zynq: DT: Migrate UART to Cadence binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 03/11/2014 04:48 PM, Sören Brinkmann wrote:
> On Tue, 2014-03-11 at 09:52AM +0100, Michal Simek wrote:
>> On 03/10/2014 10:40 PM, Soren Brinkmann wrote:
>>> The Zynq UART is Cadence IP and the driver has been renamed accordingly.
>>> Migrate the DT to use the new binding for the UART driver.
>>>
>>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
>>> Acked-by: Peter Crosthwaite <peter.crosthwaite@xxxxxxxxxx>
>>> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>>> ---
>>> This change depends on 'tty: xuartps: Rebrand driver as Cadence UART',
>>> which introduces the new clock-names.
>>> ---
>>>  arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++----
>>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
>>> index 8b67b19392ec..0ed0d4b0579a 100644
>>> --- a/arch/arm/boot/dts/zynq-7000.dtsi
>>> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
>>> @@ -67,19 +67,19 @@
>>>  		};
>>>  
>>>  		uart0: uart@e0000000 {
>>> -			compatible = "xlnx,xuartps";
>>> +			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
>>>  			status = "disabled";
>>>  			clocks = <&clkc 23>, <&clkc 40>;
>>> -			clock-names = "ref_clk", "aper_clk";
>>> +			clock-names = "uart_clk", "pclk";
>>>  			reg = <0xE0000000 0x1000>;
>>>  			interrupts = <0 27 4>;
>>>  		};
>>>  
>>>  		uart1: uart@e0001000 {
>>> -			compatible = "xlnx,xuartps";
>>> +			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
>>>  			status = "disabled";
>>>  			clocks = <&clkc 24>, <&clkc 41>;
>>> -			clock-names = "ref_clk", "aper_clk";
>>> +			clock-names = "uart_clk", "pclk";
>>>  			reg = <0xE0001000 0x1000>;
>>>  			interrupts = <0 50 4>;
>>>  		};
>>
>> This should be at least the part of 5/7 because between 5/7 and 7/7
>> driver will fail to probe.
> 
> The driver should never fail to probe. The old bindings will continue to
> work. So, only dependency for this is, the new clock names must be
> merged in. So, it has to be rather late in the series.

We discussed this over phone and yes, I have missed that.

Thanks,
Michal


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux