Hi, this series rebrands the Xilinx PS UART driver as Cadence UART and documents its DT bindings (+ some clean up along the way). The rebranding goes as far as reasonable. Things like file name, kconfig symbols and other things with user space impact are left as is. Please refer to the discussion in the RFC threads[1-2] for more details. Similar the DT binding has been extended. In addition to the new and preferred Cadence binding, the current xuartps binding is maintained. Though, only the Cadence names for clock-names are documented. References: [1] https://lkml.org/lkml/2014/3/4/405 [2] https://lkml.org/lkml/2014/3/7/450 v2: - no changes regarding the patches - fixed (I sincerely hope) email recipients Changes from the latest RFC: - squashed function/symbol renaming into 'tty: xuartps: Rebrand driver as Cadence UART' - Revised the commit message of 'tty: xuartps: Don't write IRQ disable register to enable interrupts' (was 'tty: xuartps: Remove bogus comment and register write' Thanks, Sören Soren Brinkmann (7): tty: xuartps: Clean up tty: xuartps: Print warning in clock notifier tty: xuartps: Refactor read-modify-writes tty: xuartps: Don't write IRQ disable register to enable interrupts tty: xuartps: Rebrand driver as Cadence UART tty: cadence: Document DT binding ARM: zynq: DT: Migrate UART to Cadence binding .../devicetree/bindings/serial/cdns,uart.txt | 20 + arch/arm/boot/dts/zynq-7000.dtsi | 8 +- drivers/tty/serial/Kconfig | 9 +- drivers/tty/serial/xilinx_uartps.c | 1116 ++++++++++---------- include/uapi/linux/serial_core.h | 2 +- 5 files changed, 560 insertions(+), 595 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/cdns,uart.txt -- 1.9.0.1.g4196000 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html