The Zynq UART is Cadence IP and the driver has been renamed accordingly. Migrate the DT to use the new binding for the UART driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> Acked-by: Peter Crosthwaite <peter.crosthwaite@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- This change depends on 'tty: xuartps: Rebrand driver as Cadence UART', which introduces the new clock-names. --- arch/arm/boot/dts/zynq-7000.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 8b67b19392ec..0ed0d4b0579a 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -67,19 +67,19 @@ }; uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; }; uart1: uart@e0001000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; }; -- 1.9.0.1.g4196000 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html