[V3, 1/4] Documentation: dt-bindings: phy: Document the Synopsys MIPI DPHY Rx bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
RX mode.

Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
---
Changelog
v2-V3
- removed gpios reference - it was for a separated driver
- changed address to show complete address

 .../devicetree/bindings/phy/snps,dphy-rx.txt       | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt

diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
new file mode 100644
index 0000000..03d17ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare MIPI Rx D-PHY block details
+
+Description
+-----------
+
+The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
+Please refer to phy-bindings.txt for more information.
+
+Required properties:
+- compatible		: Shall be "snps,dphy-rx".
+- #phy-cells		: Must be 1.
+- snps,dphy-frequency	: Output frequency of the D-PHY.
+- snps,dphy-te-len	: Size of the communication interface (8 bits->8 or 12bits->12).
+- reg			: Physical base address and size of the device memory mapped
+		 	  registers;
+
+Example:
+
+	mipi_dphy_rx1: dphy@d00003040 {
+		compatible = "snps,dphy-rx";
+		#phy-cells = <1>;
+		snps,dphy-frequency = <300000>;
+		snps,dphy-te-len = <12>;
+		reg = < 0xd0003040 0x20
+			0xd0008000 0x100
+			0xd0009000 0x100>;
+	};
+
--
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux