All Acked-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
On 2018-10-16 8:11 a.m., Srinath Mannam wrote:
These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.
Changes from v4
- Addressed Rob Herring comments on DT parameters and
thermal driver architecture.
- Removed brcm,max-crit-temp DT parameter
- Changed driver to thermal sensor registration model.
- Added trip DT properties.
Changes from v3
- Addressed Daniel lezcano comments.
- Elaborated commit description of thermal driver patch.
- Added brcm,max-crit-temp DT parameter.
Changes from v2:
- All stingray TMON DT nodes are combine together into single.
Temperature registers are combined into one mem resource.
brcm,tmon-mask parameter has available TMONs mask value.
- All available TMONs are initialized together in single
instance of driver probe call.
Changes from v1:
- Fixed auto build sparce warning.
Pramod Kumar (3):
dt-bindings: thermal: Add binding document for SR thermal
thermal: broadcom: Add Stingray thermal driver
arm64: dts: stingray: Add Stingray Thermal DT support.
.../bindings/thermal/brcm,sr-thermal.txt | 105 ++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 +++++++++++++
drivers/thermal/Kconfig | 3 +-
drivers/thermal/broadcom/Kconfig | 9 ++
drivers/thermal/broadcom/Makefile | 1 +
drivers/thermal/broadcom/sr-thermal.c | 138 +++++++++++++++++++++
6 files changed, 344 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
create mode 100644 drivers/thermal/broadcom/sr-thermal.c
