On 10/16/2018 8:11 AM, Srinath Mannam wrote: > These patches adds the stingray thermal driver and its > corresponding DT nodes with documentation. Can we get feedback from the thermal maintains whether this is acceptable or not? > > Changes from v4 > - Addressed Rob Herring comments on DT parameters and > thermal driver architecture. > - Removed brcm,max-crit-temp DT parameter > - Changed driver to thermal sensor registration model. > - Added trip DT properties. > > Changes from v3 > - Addressed Daniel lezcano comments. > - Elaborated commit description of thermal driver patch. > - Added brcm,max-crit-temp DT parameter. > > Changes from v2: > - All stingray TMON DT nodes are combine together into single. > Temperature registers are combined into one mem resource. > brcm,tmon-mask parameter has available TMONs mask value. > - All available TMONs are initialized together in single > instance of driver probe call. > > Changes from v1: > - Fixed auto build sparce warning. > > Pramod Kumar (3): > dt-bindings: thermal: Add binding document for SR thermal > thermal: broadcom: Add Stingray thermal driver > arm64: dts: stingray: Add Stingray Thermal DT support. > > .../bindings/thermal/brcm,sr-thermal.txt | 105 ++++++++++++++++ > .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 +++++++++++++ > drivers/thermal/Kconfig | 3 +- > drivers/thermal/broadcom/Kconfig | 9 ++ > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/sr-thermal.c | 138 +++++++++++++++++++++ > 6 files changed, 344 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt > create mode 100644 drivers/thermal/broadcom/sr-thermal.c > -- Florian
