Ping for comments > -----Original Message----- > From: linux-kernel-owner@xxxxxxxxxxxxxxx [mailto:linux-kernel- > owner@xxxxxxxxxxxxxxx] On Behalf Of Jolly Shah > Sent: Friday, September 14, 2018 12:40 PM > To: matthias.bgg@xxxxxxxxx; andy.gross@xxxxxxxxxx; shawnguo@xxxxxxxxxx; > geert+renesas@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx; > sean.wang@xxxxxxxxxxxx; m.szyprowski@xxxxxxxxxxx; Michal Simek > <michals@xxxxxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx > Cc: Rajan Vaja <RAJANV@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Jolly Shah > <JOLLYS@xxxxxxxxxx> > Subject: [PATCH v4 0/3] drivers: soc: xilinx: Add support for ZynqMP PM driver > > Add ZynqMP PM driver. PM driver provides power management support for > ZynqMP. > > This patch series is based on top of Xilinx firmware patch set: > https://patchwork.kernel.org/cover/10598195/ > > v4: > - Minor fixes to address v3 review comments > > v3: > - Updated DT bindings as per v2 review comments > > v2: > - Rebased on top of latest firmware driver patch series > - Updated driver to use shared interrupt instead of mailbox > > Rajan Vaja (3): > dt-bindings: soc: Add ZynqMP PM bindings > firmware: xilinx: Implement ZynqMP power management APIs > drivers: soc: xilinx: Add ZynqMP PM driver > > .../bindings/power/reset/xlnx,zynqmp-power.txt | 22 +++ > drivers/firmware/xilinx/zynqmp.c | 29 ++++ > drivers/soc/xilinx/Kconfig | 11 ++ > drivers/soc/xilinx/Makefile | 1 + > drivers/soc/xilinx/zynqmp_power.c | 178 +++++++++++++++++++++ > include/linux/firmware/xlnx-zynqmp.h | 20 +++ > 6 files changed, 261 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt > create mode 100644 drivers/soc/xilinx/zynqmp_power.c > > -- > 2.7.4