Add ZynqMP PM driver. PM driver provides power management support for ZynqMP. This patch series is based on top of Xilinx firmware patch set: https://patchwork.kernel.org/cover/10598195/ v4: - Minor fixes to address v3 review comments v3: - Updated DT bindings as per v2 review comments v2: - Rebased on top of latest firmware driver patch series - Updated driver to use shared interrupt instead of mailbox Rajan Vaja (3): dt-bindings: soc: Add ZynqMP PM bindings firmware: xilinx: Implement ZynqMP power management APIs drivers: soc: xilinx: Add ZynqMP PM driver .../bindings/power/reset/xlnx,zynqmp-power.txt | 22 +++ drivers/firmware/xilinx/zynqmp.c | 29 ++++ drivers/soc/xilinx/Kconfig | 11 ++ drivers/soc/xilinx/Makefile | 1 + drivers/soc/xilinx/zynqmp_power.c | 178 +++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 20 +++ 6 files changed, 261 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt create mode 100644 drivers/soc/xilinx/zynqmp_power.c -- 2.7.4
