Ping for comments Thanks, Jolly Shah > -----Original Message----- > From: Jolly Shah [mailto:jolly.shah@xxxxxxxxxx] > Sent: Thursday, October 04, 2018 2:24 PM > To: matthias.bgg@xxxxxxxxx; andy.gross@xxxxxxxxxx; shawnguo@xxxxxxxxxx; > geert+renesas@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx; > sean.wang@xxxxxxxxxxxx; m.szyprowski@xxxxxxxxxxx; Michal Simek > <michals@xxxxxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx > Cc: Rajan Vaja <RAJANV@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Jolly Shah > <JOLLYS@xxxxxxxxxx> > Subject: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power > domain driver > > The zynqmp power domain driver communicates the usage requirements for > logical power domains / devices to the platform FW. > FW is responsible for choosing appropriate power states, taking Linux' usage > information into account. > > This patch series is based on top of Xilinx firmware patch set: > https://patchwork.kernel.org/cover/10555405/ > > v3: > - Changed binding to have FW node as a power controller as suggested by Rob > - Updated FW driver to register it as mfd child devices from firmware probe > - Move bindings location as suggested > > v2: > - Rebased on top of latest firmware driver patch series > - Updated driver name from zynqmp-genpd to zynqmp-power-controller > - Updated device tree bindings to move power controller node under firmware > node > > Jolly Shah (1): > drivers: soc: xilinx: Add ZynqMP power domain driver > > Rajan Vaja (3): > dt-bindings: power: Add ZynqMP power domain bindings > firmware: xilinx: Add APIs to control node status/power > firmware: xilinx: Add node IDs for zynqmp firmware > > .../bindings/power/xlnx,zynqmp-genpd.txt | 34 ++ > drivers/firmware/xilinx/Kconfig | 1 + > drivers/firmware/xilinx/zynqmp.c | 73 ++++ > drivers/soc/xilinx/Kconfig | 9 + > drivers/soc/xilinx/Makefile | 2 + > drivers/soc/xilinx/zynqmp_pm_domains.c | 403 > +++++++++++++++++++++ > include/dt-bindings/power/xlnx-zynqmp-power.h | 39 ++ > include/linux/firmware/xlnx-zynqmp.h | 98 +++++ > 8 files changed, 659 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp- > genpd.txt > create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c > create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h > > -- > 2.7.4
