[PATCH v2 5/5] DT: marvell,mmp2: Add SSP1 and SSP3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There seem to be SSP2, SSP4 and perhaps SSP5 too, but Marvel keeps their
base addresses secret.

The SSP1 and SSP3 addresses were taken from OLPC 1.75, OpenFirmware and
kernel respectively.

Cc: Eric Miao <eric.y.miao@xxxxxxxxx>
Cc: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 arch/arm/boot/dts/mmp2.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..ba55d6483ed0 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -18,6 +18,8 @@
 		serial3 = &uart4;
 		i2c0 = &twsi1;
 		i2c1 = &twsi2;
+		spi0 = &ssp1;
+		spi3 = &ssp3;
 	};
 
 	soc {
@@ -239,6 +241,22 @@
 				resets = <&soc_clocks MMP2_CLK_RTC>;
 				status = "disabled";
 			};
+
+			ssp1: ssp@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			ssp3: ssp@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <20>;
+				status = "disabled";
+			};
 		};
 
 		soc_clocks: clocks{
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux