[PATCH v2 0/5] Make SPI work on DT MMP2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: [PATCH v2 0/5] Make SPI work on DT MMP2
From: Lubomir Rintel <lkundrak@xxxxx>
Date: Mon, 17 Sep 2018 13:35:54 +0200
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, linux-spi@xxxxxxxxxxxxxxx

This makes SPI work on an OPLC 1.75 that is a DT MMP2 platform.
Changes since v1 are cosmetic, describe in individual patches.

Thanks,
Lubo

Follow-Ups:
- [PATCH v2 5/5] DT: marvell,mmp2: Add SSP1 and SSP3
  - From: Lubomir Rintel
- [PATCH v2 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
  - From: Lubomir Rintel
- [PATCH v2 3/5] spi: pxa2xx: Use an enum for type
  - From: Lubomir Rintel
- [PATCH v2 4/5] spi: pxa2xx: Add devicetree support
  - From: Lubomir Rintel
- [PATCH v2 2/5] PCI: Provide pci_match_id() with CONFIG_PCI=n
  - From: Lubomir Rintel

Prev by Date: Re: [PATCH 0/4] power: supply: MAX17040: Add IRQ for low level and alert SOC changes
Next by Date: [PATCH v2 2/5] PCI: Provide pci_match_id() with CONFIG_PCI=n
Previous by thread: [PATCH] DT: marvell,mmp2: give gpio node a name
Next by thread: [PATCH v2 2/5] PCI: Provide pci_match_id() with CONFIG_PCI=n
Index(es):
- Date
- Thread

[Index of Archives] [Device Tree Compilter] [Device Tree Spec] [Linux Driver Backports] [Video for Linux] [Linux USB Devel] [Linux PCI Devel] [Linux Audio Users] [Linux Kernel] [Linux SCSI] [XFree86] [Yosemite Backpacking]

Powered by Linux