On Thu, Aug 09, 2018 at 08:29:44PM +0100, Kieran Bingham wrote:
> The ADV748x supports configurable slave addresses for its I2C pages.
> Document the page names, and provide an example for setting each of the
> pages explicitly.
It would be good to say why you need this. The only use I can think of
is if there are other devices on the bus and you need to make sure the
addresses don't conflict. Arguably, that information could be figured
out without this in DT.
Regardless,
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
>
> ---
> v2:
> - Fix commit message
> - Extend documentation for the "required property" reg:
>
> v3
> - Fix missing comment from Laurent.
> - correct the reg descrption
> ---
> .../devicetree/bindings/media/i2c/adv748x.txt | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> index 21ffb5ed8183..25a02496f4ba 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -10,7 +10,11 @@ Required Properties:
> - "adi,adv7481" for the ADV7481
> - "adi,adv7482" for the ADV7482
>
> - - reg: I2C slave address
> + - reg: I2C slave addresses
> + The ADV748x has up to twelve 256-byte maps that can be accessed via the
> + main I2C ports. Each map has it own I2C address and acts as a standard
> + slave device on the I2C bus. The main address is mandatory, others are
> + optional and remain at default values if not specified.
>
> Optional Properties:
>
> @@ -18,6 +22,11 @@ Optional Properties:
> "intrq3". All interrupts are optional. The "intrq3" interrupt
> is only available on the adv7481
> - interrupts: Specify the interrupt lines for the ADV748x
> + - reg-names : Names of maps with programmable addresses.
> + It shall contain all maps needing a non-default address.
> + Possible map names are:
> + "main", "dpll", "cp", "hdmi", "edid", "repeater",
> + "infoframe", "cbus", "cec", "sdp", "txa", "txb"
>
> The device node must contain one 'port' child node per device input and output
> port, in accordance with the video interface bindings defined in
> @@ -47,7 +56,10 @@ Example:
>
> video-receiver@70 {
> compatible = "adi,adv7482";
> - reg = <0x70>;
> + reg = <0x70 0x71 0x72 0x73 0x74 0x75
> + 0x60 0x61 0x62 0x63 0x64 0x65>;
> + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
> + "infoframe", "cbus", "cec", "sdp", "txa", "txb";
>
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 2.17.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
