On Thu, Aug 09, 2018 at 01:25:15PM +0000, Janek Kotas wrote: > This patch adds a DT binding documentation for > Cadence UFS Host Controller. > > Signed-off-by: Jan Kotas <jank@xxxxxxxxxxx> > --- > .../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt > > diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt > new file mode 100644 > index 00000000..a04a4989 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt > @@ -0,0 +1,31 @@ > +* Cadence Universal Flash Storage (UFS) Controller > + > +UFS nodes are defined to describe on-chip UFS host controllers. > +Each UFS controller instance should have its own node. > +Please see the ufshcd-pltfrm.txt for a list of all available properties. > + > +Required properties: > +- compatible : Compatible list, contains the following controller: > + "cdns,ufshc" > + complemented with the JEDEC version: > + "jedec,ufs-2.0" > + > +- reg : Address and length of the UFS register set. > +- interrupts : One interrupt mapping. > +- freq-table-hz : Clock frequency table. > + See the ufshcd-pltfrm.txt for details. > +- clocks : List of phandle and clock specifier pairs. > +- clock-names : List of clock input name strings sorted in the same > + order as the clocks property. "core_clk" is mandatory. > + Depending on a type of a PHY, > + the "phy_clk" clock can also be added, if needed. Unfortunately, you went the wrong direction. The '_clk' part is redundant. Just 'core' and 'phy'. With that, Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > + > +Example: > + ufs@fd030000 { > + compatible = "cdns,ufshc", "jedec,ufs-2.0"; > + reg = <0xfd030000 0x10000>; > + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; > + freq-table-hz = <0 0>, <0 0>; > + clocks = <&ufs_core_clk>, <&ufs_phy_clk>; > + clock-names = "core_clk", "phy_clk"; > + }; > -- > 2.15.0 > > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html